Beck/Arnley 158-1061 fuel injection manifold pressure sensor for the 2008-2011 Mitsubishi Lancer 4-cylinder 2.0L, the 2009-2011 Lancer 4-cylinder 2.4L and other vehicles measures manifold pressure and sends that reading to the engine computer. Also sold as a MAP sensor, it is made for its specific application.
- Corrosion-resistant terminals and coatings
- Application-specific design
Quick facts
- Part: Beck/Arnley 158-1061 fuel injection manifold pressure sensor
- Fits: the 2008-2011 Mitsubishi Lancer 4-cylinder 2.0L, the 2009-2011 Lancer 4-cylinder 2.4L and other vehicles
- Condition: New
A rough idle, poor fuel economy or a check engine light can go with a worn manifold pressure sensor. Before you replace it, rule out a vacuum leak or a damaged connector or wiring, since those can give similar readings. If this sensor is the cause, this unit replaces it.
Fits
Listed for a wide range of Mitsubishi models, led by the 2008-2009 Mitsubishi Outlander V6 3.0L, the 2008-2011 Outlander 4-cylinder 2.4L and the 2011 Mitsubishi Eclipse V6 3.8L, this sensor is built to match OE form, fit and function. If your Mitsubishi is not named here, enter its year and engine in the "Vehicles it fits" section.
Specifications
- Quantity per vehicle: 1
- Terminals and coatings: corrosion resistant
- Condition: New
In the box
One fuel injection manifold pressure sensor. This listing is one sensor, and the car takes one.
Interchange: 5S11693 · 5S11694 · 1865A139 · AS457 · SU13146
This part cross-references / interchanges with the following part numbers:
5S11693, 5S11694, 1865A139, AS457, SU13146
Frequently Asked Questions
Is the Beck/Arnley 158-1061 sensor right for the 2008-2011 Mitsubishi Lancer 4-cylinder 2.0L?
Yes. Beck/Arnley 158-1061 is listed for the 2008-2011 Mitsubishi Lancer 4-cylinder 2.0L and the 2009-2011 Lancer 4-cylinder 2.4L. Other models are in the "Vehicles it fits" section.
Does this manifold pressure sensor fit the 2008-2009 Mitsubishi Outlander V6 3.0L?
Yes. Beck/Arnley 158-1061 is listed for the 2008-2009 Mitsubishi Outlander V6 3.0L and also the 2008-2011 Outlander 4-cylinder 2.4L.
Are the terminals on this Beck/Arnley manifold pressure sensor corrosion resistant?
Yes. The terminals and coatings on this manifold pressure sensor are corrosion resistant.
What can a failing fuel injection manifold pressure sensor look like on the road?
A rough idle, poor fuel economy or a check engine light can go with a failing sensor. A shop can read the stored codes to narrow down the cause.
Is 1865A139 a cross-reference for Beck/Arnley 158-1061?
Yes. 1865A139 is one of the numbers cross-referenced to Beck/Arnley 158-1061, along with 5S11693, 5S11694, AS457 and SU13146.
