Beck/Arnley 159-1030 fuel injector for the 2003-2007 Honda Accord 4-cylinder 2.4L and other vehicles delivers fuel to the engine for combustion. This new Beck/Arnley fuel injector is part of the engine's fuel system.
- Replace all injectors in the engine together for performance
- Re-used injectors need professional cleaning and flow testing
- Application specific part for the vehicle
Quick facts
- Part: Beck/Arnley 159-1030 fuel injector
- Fits: 2003-2007 Honda Accord 4-cylinder 2.4L and other vehicles
- Condition: New
A rough idle, a misfire or hard starting can mean an injector is worn or clogged. Those signs alone do not prove the injector is at fault, since a worn spark plug can cause a misfire just as well.
Fits
It works as a fuel injector for the 2005-2009 Honda CR-V 4-cylinder 2.4L and the 2003-2011 Honda Element 4-cylinder 2.4L, and matches OE form, fit and function. If your car is not named here, look up its year and engine in the "Vehicles it fits" section.
Specifications
- Quantity per vehicle: varies by application
- Sold individually: one injector per listing
- Condition: New
In the box
One fuel injector. The quantity per vehicle varies; the 2003-2007 Honda Accord 4-cylinder 2.4L takes four, so order four for it.
Installation notes
- Follow the instructions and safety precautions in the vehicle service manual.
- Check the vehicle owner manual for fuel grade requirements.
Interchange: 16450RAAA01 · 4G1710 · 63866 · FJ484 · W01331709826 · M931
This part cross-references / interchanges with the following part numbers:
16450RAAA01, 4G1710, 63866, FJ484, W01331709826, M931
Frequently Asked Questions
Does this Honda Accord fuel injector fit a 2003-2007 model with the 4-cylinder 2.4L engine?
Yes. Beck/Arnley 159-1030 fits the 2003-2007 Honda Accord 4-cylinder 2.4L. For other years or engines, look up your car in the "Vehicles it fits" section.
For a Honda Accord fuel injector replacement on a 2003-2007 model with the 4-cylinder 2.4L, should all four injectors be changed?
Yes. This listing is one injector and that engine takes four, so order four. Replacing all injectors in the engine gives the best performance.
Do re-used fuel injectors need anything before they go back in?
Yes. Any injectors you re-use should be professionally cleaned and flow tested before installation.
Where do I find the fuel grade requirement before installing the Beck/Arnley 159-1030?
For the Beck/Arnley 159-1030, the vehicle owner manual gives the fuel grade requirements. The vehicle service manual gives the instructions and safety precautions for the job.
Is 16450RAAA01 interchangeable with this fuel injector?
Yes. 16450RAAA01 is one of the numbers this fuel injector replaces; the rest are on the Interchange line.
