Beck/Arnley Steering Tie Rod End P/N:101-5427

Be the first to review this product
$56.99
MPN: 101-5427
Item Package Quantity: 1
Adding to cart… The item has been added

Have questions?

Beck/Arnley Steering Tie Rod End P/N:101-5427
Beck/Arnley Steering Tie Rod End P/N:101-5427
$56.99

Keep your steering crisp and controlled with the Beck/Arnley Steering Tie Rod End 101-5427, a front left outer tie rod end that fits the 2001-2006 Lexus LS430. If you're shopping for an LS430 tie rod, this piece connects the steering linkage to the steering knuckle, transmitting input from the steering gear out to the front wheel so the tire points where you steer.

  • Matches OE form, fit and function — engineered as a direct replacement for the original part across foreign-nameplate applications.
  • Coated or plated for corrosion protection.
  • Ball joint is pre-greased and built with a full ball stud.
  • Easy-access wrench flat lets you use a socket for straightforward installation and removal.

A worn tie rod end often shows up as loose or wandering steering, a clunk or knock when turning, and uneven front-tire wear. If a failed front left outer tie rod end is the cause, this Beck/Arnley steering tie rod end replaces it. It installs in the front left outer position; inspect and, when needed, service both sides and have the alignment checked after replacement.

Interchange: 45A0914 · 61244072 · OET606 · TO64071PR · 4547059045 · ES800446 · ES4108 · MS86616 · 4011914

This part cross-references / interchanges with the following part numbers:

45A0914, 61244072, OET606, TO64071PR, 4547059045, ES800446, ES4108, MS86616, 4011914

Frequently Asked Questions

What vehicle does the Beck/Arnley tie rod end 101-5427 fit?

It fits the 2001-2006 Lexus LS430 in the front left outer position. Check the Buyer's Guide tab to confirm it matches your vehicle.

Where is this tie rod end located?

This is a front left outer tie rod end. It links the outer steering linkage to the steering knuckle on the front left of the vehicle.

What are the signs of a worn tie rod end?

Common signs include loose or wandering steering, a clunk or knock when turning, and uneven front-tire wear. Diagnose the cause before replacing.

Is the ball joint greased and ready to install?

Yes. The ball joint is pre-greased and uses a full ball stud, and an easy-access wrench flat lets you use a socket for installation and removal.

Do I need to replace both tie rod ends?

This BECK ARNLEY steering tie rod end covers the front left outer position only. Inspect both sides, replace as needed, and have the alignment checked afterward.