Help keep your steering precise and responsive with the Beck/Arnley tie rod end, part number 101-5521, which connects the steering linkage to the steering knuckle at the front outer position. It fits many vehicles, among them the 2008-2010 BMW 528i, 2008-2010 BMW 535i and 2006-2010 BMW 550i. See the "Vehicles it fits" section for the full list.
Beck/Arnley designs its parts as direct replacements for original equipment on foreign nameplates, with close attention to form, fit and function. Its product specialists source them through a global network, and each part is made to meet Beck/Arnley's own requirements and specifications.
- OE match: Matches the original part's form, fit and function.
- Corrosion protection: Coated or plated to help protect against corrosion.
- Pre-greased ball joint: The ball joint comes pre-greased.
- Wrench flat: An easy-access wrench flat lets you use a socket for easier installation and removal.
- Full ball stud: Built with a full ball stud.
A worn steering tie rod end can show up as loose or wandering steering, a clunk when turning, or uneven tire wear. If a worn outer tie rod end is the cause, this part replaces it. A wheel alignment is typically recommended after installation.
Interchange: 32106774361 · 32106776946 · 32216756369 · 61234016 · TO14205XL · 43906062681 · TO14205 · ES800397 · ES800478 · ES4453 · MS10637 · JTE1063
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
32106774361, 32106776946, 32216756369, 61234016, TO14205XL, 43906062681, TO14205, ES800397, ES800478, ES4453, MS10637, JTE1063
Frequently Asked Questions
Is this the right tie rod end for a 2008-2010 BMW 528i?
It is listed as a front outer tie rod end for the 2008-2010 BMW 528i. Check the "Vehicles it fits" section to confirm your exact vehicle.
What does a tie rod end do?
It connects the steering linkage to the steering knuckle, so steering input turns the front wheel. This one mounts in the front outer position.
What features does the Beck/Arnley 101-5521 have?
It is coated or plated for corrosion protection. It has a pre-greased ball joint, a full ball stud, and an easy-access wrench flat that lets you use a socket.
What are signs a tie rod end may need replacing?
Loose or wandering steering, a clunk when turning, or uneven tire wear can be signs of a worn tie rod end. Other steering parts can cause these too, so diagnose the cause before replacing.
Do I need an alignment after installing a tie rod end?
Replacing a tie rod end affects toe settings, so a wheel alignment is generally recommended afterward. Follow the vehicle service information for the correct torque specifications.
