Help keep steering response tight and predictable with the Beck/Arnley 101-7662 front inner tie rod end, a direct-replacement 4Runner tie rod for the 2010-2024 Toyota 4Runner and the 2010-2014 Toyota FJ Cruiser. As a key link in the steering linkage, it carries steering input toward the wheel while allowing the suspension to move through its travel.
Beck/Arnley designs its parts as direct replacements for original equipment applications, with close attention to form, fit and function. Its product specialists work with a trusted global sourcing network to supply OE-quality parts that meet Beck/Arnley's own requirements and specifications. This Beck/Arnley tie rod end is cataloged for the front inner position on the listed applications.
Signs a steering tie rod end may need replacing include play in the steering wheel, wandering, a clunk when turning and uneven tire wear. These symptoms can have other causes, so have the steering inspected before replacing parts, and check wheel alignment after installation. For engine and trim details, see the Buyer's Guide tab.
Interchange: 61244219 · EV801007 · ES4813 · MS86730 · 4550335070
This part cross-references / interchanges with the following part numbers:
Will this 2010-2024 Toyota 4Runner tie rod also fit my 2010-2014 Toyota FJ Cruiser?
It is listed for the 2010-2024 Toyota 4Runner and the 2010-2014 Toyota FJ Cruiser. Check the Buyer's Guide tab for the details of your exact vehicle.
Is this tie rod end an inner or an outer?
It is cataloged for the front inner position. Beck/Arnley designs it to match the original part's form, fit and function.
What does a tie rod end do?
It is part of the steering linkage. It carries steering input toward the wheel while allowing the suspension to move.
What are signs of a worn tie rod end?
Play in the steering wheel, wandering, a clunk when turning or uneven tire wear may point to a worn tie rod end. Other parts can cause these too, so diagnose before replacing.
Is the tie rod end ready to install?
The ball joint comes pre-greased, and a wrench flat accepts a socket for easier installation and removal. A wheel alignment check is recommended after replacement.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
