Beck/Arnley 101-7974 front inner tie rod end for the 2013-2015 Honda Crosstour V6 3.5L passes steering movement from the rack toward the front wheel.
Loose or wandering steering, a clunk when turning or uneven front tire wear can mean a worn steering tie rod end. A worn outer tie rod end, ball joint, control arm bushing or wheel bearing can be behind these signs too, so find the cause before you buy.
The Beck/Arnley tie rod end matches OE form, fit and function on the 2013-2015 Honda Crosstour V6 3.5L, which takes two. This listing is one front inner tie rod end; the other side of that axle is normally done at the same time.
Fit and size
Build and materials
Interchange: 53610TP6A62 · MS60732
This part cross-references / interchanges with the following part numbers:
Does the Beck/Arnley 101-7974 fit the 2013-2015 Honda Crosstour V6 3.5L?
Yes. The Beck/Arnley 101-7974 is a front inner tie rod end for the 2013-2015 Honda Crosstour V6 3.5L, and that car takes two.
Can a socket be used on this front inner tie rod end?
Yes. It has an easy-access wrench flat that accepts a socket, which helps when installing or removing the part.
Does Beck/Arnley 101-7974 replace 53610TP6A62?
Yes. 53610TP6A62 is one of the numbers the Beck/Arnley 101-7974 tie rod end replaces.
Can I keep driving with a worn front inner tie rod end?
No. A worn tie rod end affects steering, so have the car inspected and the part replaced promptly.
Is the ball joint on this tie rod end pre-greased?
Yes. The ball joint on this tie rod end comes pre-greased, and it has a full ball stud.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
