Dayco 5040358 serpentine belt for the 1996-2000 Toyota 4Runner 4-cylinder 2.7L and other vehicles turns the engine's belt-driven accessories. This Dayco drive belt runs a single loop around pulleys such as the alternator, water pump, power steering and air conditioning, depending on the vehicle.
- EPDM material, aramid reinforced
- Straight rib profile with 4 ribs in a K-section
- Operating temperature range of -45°F to 212°F (-42.7°C to 100°C)
- Built to SAE J1459 and SAE J2432
- Effective length of 35.83 in (910.09 mm)
Quick facts
- Part: Dayco 5040358 serpentine belt
- Fits: the 1996-2000 Toyota 4Runner 4-cylinder 2.7L and other vehicles
- Position: Power steering, air conditioning, water pump and alternator, water pump, water pump to power steering, air conditioning and idler
- Material: EPDM, aramid reinforced
- Condition: New
Cracks, fraying, glazing or a squeal at start-up can mean a belt is worn. A weak tensioner, a worn idler pulley or a misaligned accessory pulley can be behind those signs too, so find the cause before you buy a new belt.
Fits
This Dayco poly rib belt also fits the 1986-1989 Honda Accord and the 1989-1994 Nissan Sentra. If your car is not named here, open the "Vehicles it fits" section and look up your exact model and engine.
Specifications
Fit and size
- Position: Power steering, air conditioning, water pump and alternator, water pump, water pump to power steering, air conditioning and idler
- Quantity per vehicle: 1
- Effective length: 35.83 in (910.09 mm)
- Outside circumference: 36.50 in (927.10 mm)
- Top width: 0.54 in
- Rib quantity: 4
Build and materials
- Rib profile: Straight rib
- Cross section: K-section
- Rib depth: Standard
- Material: EPDM, aramid reinforced
- Standards: SAE J1459, SAE J2432
- Operating temperature: -45°F to 212°F (-42.7°C to 100°C)
- Condition: New
- Country of origin: Mexico
In the box
One serpentine belt. This listing holds one belt, and each vehicle takes one.
Interchange: 25-040358
4K358 · 4PK910 · K040358 · 4040358 · PK040358 · 358K4 · 4050356
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
4K358, 4PK910, K040358, 4040358, PK040358, 358K4, 4050356, 25-040358, 38920-PH5-9511, 91940-09101, 1U34-15-904, JE74-15-907, MB439714, MD984617, MN158100, MN187015, 11720-77A00, 11720-77A00TM, 11720-Q5200, 90916-02661, 99364-00910, 99364-00910-78, 99364-20910, 99364-20910-83, 99364-50910, 99364-70910, 99364-80910
Frequently Asked Questions
Is this drive belt right for the 1986-1989 Honda Accord?
Yes. Dayco 5040358 is listed for the 1986-1989 Honda Accord, and the car takes one belt. Open the "Vehicles it fits" section to look up other models.
Will Dayco 5040358 work as a serpentine belt on a 1996-2000 Toyota 4Runner 4-cylinder 2.7L?
Yes. Dayco 5040358 is listed for the 1996-2000 Toyota 4Runner 4-cylinder 2.7L, and each of those vehicles takes one belt.
How long is this belt, and how many ribs does it have?
This serpentine belt has 4 ribs in a K-section. Its effective length is 35.83 in (910.09 mm) and its outside circumference is 36.50 in (927.10 mm).
What temperature range is this EPDM belt rated for?
The belt operates from -45°F to 212°F (-42.7°C to 100°C). It is made of EPDM, aramid reinforced, and meets SAE J1459 and SAE J2432.
Does Dayco 5040358 replace the 4PK910 belt?
Yes. 4PK910 is one of the numbers this Dayco belt replaces. Other cross-reference numbers are on the Interchange line at the bottom of the description.
