Bosch Direct Injection High Pressure Fuel Pump P/N:66802
Bosch 66846 direct injection high pressure fuel pump for the 2013-2019 Ford Explorer V6 3.5L and other vehicles pressurizes fuel for the direct injection system. The pump is made in-house at Bosch rather than sourced or reverse-engineered.
Hard starting, hesitation or lost power can come from a worn high pressure pump. Other parts, such as the low-pressure supply, injectors or sensors, can bring on those symptoms too, so track down the source before you buy. With the engine off and cool, look over the pump and its fittings for fuel wetness or damage, and leave fuel pressure testing to a shop. Each engine takes a single pump.
This pump is an OE direct-fit replacement for the 2013-2019 Ford Explorer V6 3.5L, the 2010-2019 Ford Taurus V6 3.5L and the 2010-2019 Ford Flex V6 3.5L. Own a different car? Enter its year and engine in the "Vehicles it fits" section to see whether this pump is listed for it.
Fit and size
Build and materials
One direct injection high pressure fuel pump with an o-ring seal. A lock ring and a wire harness are not included.
Interchange: AA5Z9350A
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Bosch 66846 fuel pump fit a 2013-2019 Ford Explorer V6 3.5L?
Yes. Bosch 66846 is listed for the 2013-2019 Ford Explorer V6 3.5L, and also for the 2010-2019 Ford Taurus V6 3.5L and the 2010-2019 Ford Flex V6 3.5L.
Does this direct injection pump come with an o-ring or a lock ring?
It comes with an o-ring seal. A lock ring and a wire harness are not included, so the pump arrives as a single unit.
What outlet size and thread does the Bosch 66846 pump have?
The outlet is 14 mm with an M14 x 1.5 thread. The inlet is 9.5 mm, threaded or quick connect, on a steel piston pump.
Is this Bosch GDI pump function tested before it is sold?
Yes. Every Bosch fuel pump gets an end-of-line function test before it leaves the manufacturing facility.
Does the Bosch 66846 need any special wiring work to install?
This pump is designed for plug-and-play installation. A wire harness is not included with it.
Published by the manufacturer of this part. Links open in a new tab.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.