Bosch Disc Brake Pad Set P/N:BC1100
Bosch BC711 rear brake pad for the 1996-2003 Ford F-150 and other vehicles presses against the rotor to slow the vehicle. These Bosch brake pads are made for the rear axle and use a ceramic friction material.
Squealing or grinding, longer stopping distances or vibration when braking can mean the pads are worn. During a brake service with the wheels off, compare the remaining friction material on each pad and look for uneven wear. A pad that wears faster than its mate can come from a sticking caliper, which a shop should sort out before new pads go on.
On the 2002-2003 Ford F-150, the pads are listed for the V6-4.2L, V8-4.6L and V8-5.4L. Listed for a wide range of Ford and Lincoln models, the set also fits the 1997-1999 Ford F-250 and works as Ford Expedition brake pads for the 1997-2002 model. For your exact model and engine, open the "Vehicles it fits" section.
Fit and size
Build and materials
One disc brake pad set of four pads for the rear axle, with pad shims, mounting hardware and synthetic lubricant for the sliding contact points. Each vehicle takes one set. A pad wear sensor and abutment clips are not included.
Interchange / FMSI:
FMSI: D711
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Are these Ford F-150 brake pads for the rear axle of a 1996-2003 Ford F-150?
Yes. Bosch BC711 is a rear pad set, so it goes on the rear axle of the 1996-2003 Ford F-150. Open the "Vehicles it fits" section to match your engine.
Can I use these Ford F-250 brake pads on a 1997-1999 Ford F-250?
Yes. This rear pad set is listed for the 1997-1999 Ford F-250, and that truck takes one set.
Do these ceramic rear pads include shims, hardware and lubricant?
Yes. Bosch BC711 comes with pad shims, mounting hardware and synthetic lubricant. A pad wear sensor and abutment clips are not included.
Are Bosch QuietCast brake pads copper-free?
Yes. The friction formula in this ceramic set is copper-free and complies with 2025 Copper Free legislation.
What does the coating on the hardware in this pad set do?
The PTFE and rubber coating on the hardware reduces vibration and noise and helps keep it from binding to the caliper. The backing plate is powder-coated against rust and corrosion.
Published by the manufacturer of this part. Links open in a new tab.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.