Bosch BE932H rear brake pad for the 2010-2011 Ford Ranger and other vehicles presses its friction material against the rotor to slow the wheel. Among Bosch brake pads, this Bosch Blue disc brake pad set is made for everyday drivers and uses a ceramic friction material for quiet, clean performance.
- Bonded ceramic friction material, 15.6 mm thick on the inner and outer pads
- Pre-attached multi-layer shims for lower noise and corrosion resistance
- Product coating that prevents rust and corrosion on the pad
- Slotted pads
- Stainless hardware, as applicable, for smooth operation and reduced noise
- Synthetic lubricant supplied to reduce resistance at sliding contact points
Quick facts
- Part: Bosch BE932H brake pad
- Also called: disc brake pad set
- Fits: 2010-2011 Ford Ranger and other vehicles
- Position: Rear
- Material: Ceramic friction material
- Condition: New
Squealing, grinding, longer stops or a pulsing pedal can mean the rear pads are worn, though a sticking caliper or a worn rotor can produce similar signs, so sort out which one it is before you buy pads.
Fits
The 2010-2011 Ford Ranger, the 2003-2011 Ford Crown Victoria and the 2003-2011 Mercury Grand Marquis all take this pad set, and so do more vehicles. The 2010-2011 Ford Ranger takes one set of four pads. If your car is not one of these, find it in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: Rear
- Quantity per vehicle: 1 set
- Pads per set: 4
- Friction material thickness: 15.6 mm (inner and outer pads)
Build and materials
- Friction material: Ceramic, bonded
- Slotted: Yes
- Grade: Standard replacement
- Pad wear sensor: not included
- Condition: New
- Country of origin: Mexico
In the box
Four brake pads with mounting hardware, abutment clips, pad shims and synthetic brake lubricant. A pad wear sensor is not included.
Interchange / FMSI:
FMSI: D932
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Is this Ford Ranger brake pad right for a 2010-2011 Ford Ranger?
Yes. Bosch BE932H is a rear brake pad set for the 2010-2011 Ford Ranger, and it also fits the 2003-2011 Ford Crown Victoria and other vehicles.
Which hardware comes with the Bosch BE932H rear pads?
The Bosch BE932H set includes four pads with mounting hardware, abutment clips, pad shims and synthetic brake lubricant. A pad wear sensor is not included.
Are Bosch ceramic brake pads like this one slotted?
Yes. This rear pad is slotted, with bonded ceramic friction material that is 15.6 mm thick on both the inner and outer pads.
How can I tell when Bosch blue disc brake pads are worn?
Squealing, grinding or longer stops can mean the pads are worn. This set has no wear sensor, so a shop can measure the remaining friction material during a brake service.
Do Bosch blue brake pads have shims to cut noise?
Yes. Bosch BE932H pads have pre-attached multi-layer shims for noise dampening, plus a product coating that prevents rust and corrosion.
