Bosch Fuel Pump Module Assembly P/N:66110
Bosch 69787 fuel pump module for the 2009-2017 Chevrolet Traverse V6 3.6L and other vehicles pumps fuel from the tank to the fuel injection system. It is demand controlled, so it delivers only the amount of fuel the injection system requires.
Hard starting, stalling or a whine from the fuel tank can mean the pump is worn, though a fuel pump relay or a blown fuse can be behind the same signs, so find the cause first. If the pump is the cause, this module replaces it.
It is listed for a wide range of Chevrolet, GMC and Buick models, including the 2009-2016 GMC Acadia V6 3.6L and the 2009-2017 Buick Enclave V6 3.6L. If your car is not named on this page, look up its year and engine in the "Vehicles it fits" section.
Fit and size
Build and materials
One module assembly with the fuel sending unit, strainer, filter, O-ring and a gasket or seal. This listing is one module, and a vehicle calls for just one. The lock ring, suction pipe and wiring harness are not included, so plan on getting a lock ring separately rather than reusing an old one.
Interchange: 19329336 · 19370465
This part cross-references / interchanges with the following part numbers:
Does the Bosch 69787 fuel pump module fit the 2009-2017 Chevrolet Traverse V6 3.6L?
Yes, Bosch 69787 is listed for the 2009-2017 Chevrolet Traverse V6 3.6L, and each of those vehicles takes one module; owners of other models can look their car up in the "Vehicles it fits" section.
Does the Bosch 69787 module include the lock ring and wiring harness?
No, the lock ring, suction pipe and wiring harness are not included; Bosch 69787 comes as one module assembly with the fuel sending unit, strainer, filter, O-ring and a gasket or seal.
Is this fuel pump assembly an in-tank electric pump?
Yes, this module is an electric in-tank unit for fuel injection systems, with a strainer and two layers of filtration to keep debris out of the pump.
Does the Turbine Pump in the Bosch 69787 help with hot-start problems?
Yes, the patented Turbine Pump design is intended to cut the fuel pulsation, noise and hot-start problems that older pump designs had, which improves drivability.
Is this fuel pump module designed for plug-and-play installation?
Yes, it is designed for plug-and-play installation, though the wiring harness and the lock ring are not included with this module.
Published by the manufacturer of this part. Links open in a new tab.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.