Bosch 13272 oxygen sensor for the 2001-2002 Chrysler Prowler V6 3.5L and other vehicles measures the exhaust air-fuel ratio and reports it to the ECU. It is a heated, switching-type sensor listed for both upstream and downstream positions.
- Heated narrow-band sensor gives the ECU air-fuel-ratio data for stable combustion control and helps reduce emissions
- Sensor reaches operating temperature in under 10 seconds for quick closed-loop control
- Metal housing, integrated heater element and TSP coating resist vibration, corrosion and contamination
- Built to withstand exhaust streams up to 1,880°F
- Part of the Bosch Switching-Type Oxygen (O2) sensor line
Quick facts
- Part: Bosch 13272 oxygen sensor
- Fits: 2001-2002 Chrysler Prowler V6 3.5L and other vehicles
- Position: Upstream, downstream
- Material: Metal
- Condition: New
A failing oxygen sensor can show up as a check engine light, a rough idle or lower fuel economy. Before you replace this sensor, rule out an exhaust leak, damaged wiring or another fault that can set off the same light or drop in mileage.
Fits
This sensor is listed for a wide range of Chrysler, Dodge and Plymouth models, led by the 2001-2002 Chrysler Prowler V6 3.5L, the 1999-2001 Plymouth Prowler V6 3.5L, the 1998-1999 Dodge Intrepid V6 2.7L, the 1998-2000 Intrepid V6 3.2L and the 2000 Intrepid V6 3.5L. For any other car, look up its year and engine in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: upstream and downstream
- Quantity per vehicle: 1 or 2, depending on the vehicle
- Thread: M18 - 1.5, 22 mm hex
- Overall length: 13.4 in
- Length from sealing surface to end of connector: 12.2 in
- Wiring harness length: 9.7 in
- Connector: round, female, 4 pin terminals, 4 wires
Build and materials
- Sensor type: heated, narrow-band
- Housing material: metal
- Condition: new
- Warranty: Bosch 1-year, unlimited-mileage warranty for non-commercial passenger cars and light trucks
- Country of origin: United States
In the box
This listing is one oxygen sensor with its wiring harness; a mounting bracket is not included. Vehicles take one or two sensors, depending on the model.
Installation notes
- Pre-applied conductive anti-seize on the threads
- Direct-fit connectors for quick installation
Frequently Asked Questions
Is this a 1998-1999 Dodge Intrepid V6 2.7L oxygen sensor?
Yes, Bosch 13272 is listed for the 1998-1999 Dodge Intrepid V6 2.7L, as well as the 1998-2000 Intrepid V6 3.2L and the 2000 Intrepid V6 3.5L. Each of these takes two sensors.
Does this Bosch O2 sensor come with a wiring harness?
Yes, Bosch 13272 includes its wiring harness, which is 9.7 in long. A mounting bracket is not included.
Does this Bosch premium oxygen sensor use an M18 - 1.5 thread?
Yes, the thread size is M18 - 1.5, and the hex size is 22 mm.
Is the Bosch 13272 an upstream or a downstream sensor?
Bosch 13272 is listed for both upstream and downstream positions. It is a heated narrow-band sensor with four wires and a round female connector.
How long is the warranty on this oxygen sensor?
Bosch backs it with a 1-year, unlimited-mileage warranty for non-commercial passenger cars and light trucks.
