Bosch 13461 oxygen sensor for the 2001-2012 Hyundai Elantra 4-cylinder 2.0L and other vehicles reports exhaust oxygen content to the ECU. This Bosch premium oxygen sensor is a heated, narrow-band switching type that helps the ECU keep combustion stable and emissions down.
- Reaches operating temperature in under 10 seconds for quick closed-loop control and cold-start performance
- Advanced ceramic element and optimized heater control for consistent output under thermal and vibration loads
- Metal housing with an integrated heater element and TSP coating to resist vibration, corrosion and contamination
- Withstands exhaust streams up to 1,880°F
Quick facts
- Part: Bosch 13461 oxygen sensor
- Fits: 2001-2012 Hyundai Elantra 4-cylinder 2.0L and other vehicles
- Position: Upstream, downstream
- Material: Metal housing
- Condition: New
A worn oxygen sensor can show up as a check engine light, poor fuel economy or a rough idle. Before you replace the sensor, rule out an exhaust leak, damaged wiring or a misfire, since any of them can cause similar symptoms. This listing is a single sensor, and the fitment calls for one per position, upstream or downstream.
Fits
The 2001-2012 Hyundai Elantra 4-cylinder 2.0L, the 2000-2003 Hyundai Accent 4-cylinder 1.5L, the 2001-2011 Accent 4-cylinder 1.6L and the 2010-2011 Kia Soul 4-cylinder 2.0L all take this oxygen sensor, as do many other vehicles. Don't see your car here? Look up its year and engine in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: upstream, downstream
- Quantity per application: 1
- Thread size: M18 - 1.5
- Hex size: 22 mm
- Length (sealing surface to end of connector): 13.7 in
Build and materials
- Sensor type: narrow-band, heated
- Housing material: metal
- Coating: TSP coating
- Condition: new
- Bosch warranty: 1 year, unlimited mileage, for non-commercial passenger cars and light trucks
In the box
One oxygen sensor with its wiring harness. A mounting bracket is not included.
Installation notes
- Conductive anti-seize is pre-applied to the threads.
- Direct-fit connectors allow quick installation.
Frequently Asked Questions
Is Bosch 13461 the right O2 sensor for a 2001-2012 Hyundai Elantra 4-cylinder 2.0L?
Yes, Bosch 13461 is listed for the 2001-2012 Hyundai Elantra 4-cylinder 2.0L, one sensor per application, and the "Vehicles it fits" section shows the other vehicles it fits.
Is this the right oxygen sensor for the 2010-2011 Kia Soul 4-cylinder 2.0L?
Yes. This oxygen sensor is listed for the 2010-2011 Kia Soul 4-cylinder 2.0L, and the fitment calls for one sensor for that application.
How fast does this Bosch O2 sensor reach operating temperature?
It reaches operating temperature in under 10 seconds. That gives the ECU a usable signal quickly, so closed-loop control starts sooner, including on a cold start.
What thread size and hex does Bosch 13461 have?
Bosch 13461 has an M18 - 1.5 thread and a 22 mm hex. Its length from the sealing surface to the end of the connector is 13.7 in.
Does this oxygen sensor come with anti-seize and a wiring harness?
Yes, conductive anti-seize is pre-applied to the threads and the sensor comes with its wiring harness; a mounting bracket is not included.
