Right Oxygen Sensor for 2001-2005 Mazda Miata & More - Bosch 13581

$129.99

Part number: 13581

UPC: 028851135818

Condition: New

Weight: 0.38 LBS

Item Package Quantity: 1

$129.99

Current Stock: 14

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

Bosch Oxygen Sensor P/N:13581

$129.99

Description

Bosch 13581 right oxygen sensor for the 2001-2005 Mazda Miata 4-cylinder 1.8L and other vehicles sends air-fuel-ratio readings to the ECU. As a Bosch premium oxygen sensor, it supports closed-loop fuel control and lower emissions.

Air-fuel-ratio feedback to the ECU for stable combustion control and reduced emissions
Withstands exhaust streams up to 1,880°F; metal housing and TSP coating resist vibration, corrosion and contamination
Reaches operating temperature in under 10 seconds for quick closed-loop control and cold-start performance
Heated narrow-band switching-type design with an integrated heater element

Quick facts

Part: Bosch 13581 oxygen sensor
Fits: 2001-2005 Mazda Miata 4-cylinder 1.8L and other vehicles
Position: Upstream, downstream, downstream right
Material: Metal housing
Condition: New

A failing sensor can show up as a check engine light, a rough idle or poorer fuel economy, though other faults can look the same. Before you replace it, look over the sensor's wiring and connector with the engine off and cool for melted insulation or damage.

Fits

This is an oxygen sensor for the 1995-1998 Mazda Protege 4-cylinder 1.5L, the 1995-2002 Mazda Millenia V6 2.3L, the 2001-2002 Millenia V6 2.5L and the 2001-2005 Mazda Miata 4-cylinder 1.8L. The listing is one sensor, and the fitment calls for a single sensor per application.

Specifications

Fit and size

Position: Upstream, downstream, downstream right
Quantity per application: 1
Thread size: M18 - 1.5
Hex size: 22 mm
Length (sealing surface to end of connector): 31.7 in

Build and materials

Type: Narrow-band, heated, switching-type
Housing material: Metal
Coating: TSP coating
Condition: New
Warranty: Bosch 1-year, unlimited-mileage warranty for non-commercial passenger cars and light trucks

In the box

One oxygen sensor with its wiring harness. A mounting bracket is not included.

Installation notes

Conductive anti-seize is pre-applied to the threads.
Direct-fit connectors are built for quick installation.

Manufacturer's description

Product specs

Vehicles it fits

Interchange numbers

Buyer's Q&A

Frequently Asked Questions

Is the Bosch 13581 a Miata oxygen sensor for a 2001-2005 Mazda Miata 4-cylinder 1.8L?

Yes, Bosch 13581 fits the 2001-2005 Mazda Miata 4-cylinder 1.8L. If your car isn't named on this page, enter its year, model and engine in the "Vehicles it fits" section before you order.

Is the wiring harness included with the Bosch 13581 oxygen sensor?

Yes, the Bosch 13581 comes with its wiring harness. A mounting bracket is not included.

What thread and hex size does this heated narrow-band oxygen sensor have?

This sensor has an M18 - 1.5 thread and a 22 mm hex. Its length from the sealing surface to the end of the connector is 31.7 in.

How quickly does this Bosch O2 sensor reach operating temperature?

The Bosch 13581 reaches operating temperature in under 10 seconds, so the ECU gets a signal quickly for closed-loop control. It is built for exhaust streams up to 1,880°F.

What warranty comes with this Bosch oxygen sensor?

Bosch backs it with a 1-year, unlimited-mileage warranty for non-commercial passenger cars and light trucks.

Manufacturer resources

Published by the manufacturer of this part. Links open in a new tab.