Bosch 13685 oxygen sensor for the 2002-2004 Honda Odyssey V6 3.5L sends air-fuel-ratio readings to the ECU. This Bosch O2 sensor is a heated, narrow-band design for the downstream position.
- Switching-type narrow-band sensor with an integrated heater element
- Metal housing with a TSP coating that resists vibration, corrosion and contamination
- Built to withstand exhaust gas temperatures up to 1,880°F
- Reaches operating temperature in under 10 seconds for quick closed-loop control
Quick facts
- Part: Bosch 13685 oxygen sensor
- Fits: 2002-2004 Honda Odyssey V6 3.5L
- Position: Downstream
- Material: Metal (housing)
- Condition: New
A check engine light, rough idle or lower fuel economy can mean a worn O2 sensor on the 2002-2004 Honda Odyssey V6 3.5L. These signs alone do not prove the sensor is at fault; an exhaust leak near the sensor can give similar readings.
Fits
This oxygen sensor fits the 2002-2004 Honda Odyssey V6 3.5L as the downstream sensor.
Specifications
Fit and size
- Position: Downstream
- Quantity per vehicle: 1
- Thread size: M18 - 1.5
- Hex size: 22 mm
- Length (sealing surface to end of connector): 13.8 in
Build and materials
- Sensor type: Narrow-band heated
- Housing material: Metal
- Condition: New
- Warranty: Bosch 1-year, unlimited-mileage warranty for non-commercial passenger cars and light trucks
In the box
One oxygen sensor with its wiring harness. A mounting bracket is not included, and an old bracket may not be reusable. This listing is one sensor, and the 2002-2004 Honda Odyssey V6 3.5L takes one.
Installation notes
- Conductive anti-seize is pre-applied on the threads.
- Direct-fit connectors are made for quick installation.
Frequently Asked Questions
Which position is this oxygen sensor for the 2002-2004 Honda Odyssey V6 3.5L?
Bosch 13685 is the downstream sensor for the 2002-2004 Honda Odyssey V6 3.5L, and that engine takes one.
Does the Bosch 13685 come with a wiring harness and mounting bracket?
Bosch 13685 includes its wiring harness but not a mounting bracket. The listing is one oxygen sensor.
What thread size and hex size does this downstream oxygen sensor have?
This sensor has an M18 - 1.5 thread and a 22 mm hex. The length from the sealing surface to the end of the connector is 13.8 in.
What kind of sensor is this Bosch premium oxygen sensor?
It is a heated, narrow-band switching-type sensor with a metal housing and a TSP coating. It reaches operating temperature in under 10 seconds.
Does Bosch 13685 come with anti-seize on the threads?
Yes. Conductive anti-seize is pre-applied on the threads, and the connectors are direct-fit.
Published by the manufacturer of this part. Links open in a new tab.
- Brand file 5 PDF
- Brand file 5 PDF
- Brand file 5 PDF
- Brochure PDF
- Installation instructions PDF
- Technical bulletin PDF
- Warranty PDF
- Warranty PDF
- Warranty PDF
- Product web page Maker page
- Product web page Maker page
- Product web page Maker page
- Product web page Maker page
- Product web page Maker page
- Product web page Maker page
- Product web page Maker page
- Product web page Maker page
- Product web page Maker page
- Product web page Maker page
- Product web page Maker page
- Product web page Maker page
- Product web page Maker page
- Product web page Maker page
- Product web page Maker page
- Product web page Maker page
- Product web page Maker page
- Product web page Maker page
- Product web page Maker page
- Product web page Maker page
- Product web page Maker page
- Product web page Maker page
- Product web page Maker page
- Product web page Maker page
- Product web page Maker page
- Product web page Maker page
- Product web page Maker page
- Product web page Maker page
- Product web page Maker page
- Product web page Maker page
- Product web page Maker page
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review