Bosch 13822 oxygen sensor for the 2004-2008 Mitsubishi Endeavor V6 3.8L and other vehicles reads the exhaust gas and reports the air-fuel ratio to the ECU. The ECU uses this Bosch O2 sensor reading for combustion control, which helps reduce emissions.
- Narrow-band switching-type design that sends air-fuel-ratio readings to the ECU
- Integrated heater element reaches operating temperature in under 10 seconds for quick closed-loop control
- Built to withstand exhaust gas up to 1,880°F
- TSP coating resists vibration, corrosion and contamination
Quick facts
- Part: Bosch 13822 oxygen sensor
- Fits: 2004-2008 Mitsubishi Endeavor V6 3.8L and other vehicles
- Position: Upstream, downstream left, downstream right, downstream front
- Material: Metal housing
- Condition: New
A tired oxygen sensor can show up as a check-engine light, rough running or higher fuel use. Before you replace the sensor, rule out an exhaust leak near it, damaged wiring or a connector fault that sets the same code. If the sensor is the cause, this one replaces it.
Fits
The 2004-2008 Mitsubishi Endeavor V6 3.8L, the 2004-2007 Mitsubishi Galant V6 3.8L, the 1997-2000 Mitsubishi Montero Sport V6 3.0L and the 1999-2000 Montero Sport V6 3.5L all take this sensor, and so do many other vehicles. This listing is one sensor, and the fitment calls for one per application.
Specifications
Fit and size
- Position: Upstream, downstream left, downstream right, downstream front
- Quantity: 1
- Thread size: M18 - 1.5
- Hex size: 22 mm
- Length (sealing surface to end of connector): 22.8 in
Build and materials
- Type: Narrow-band, heated
- Housing material: Metal
- Coating: TSP coating
- Wiring harness: included
- Condition: New
- Warranty: Bosch 1-year, unlimited-mileage warranty for non-commercial passenger cars and light trucks
In the box
One oxygen sensor with its wiring harness. A mounting bracket is not included.
Installation notes
- Conductive anti-seize comes pre-applied on the threads.
- Direct-fit connectors allow quick installation.
Frequently Asked Questions
Will this oxygen sensor fit a 2004-2007 Mitsubishi Galant V6 3.8L?
Yes. Bosch 13822 is listed for the 2004-2007 Mitsubishi Galant V6 3.8L. If your car is not named here, open the "Vehicles it fits" section and look it up there.
Will this oxygen sensor work on a 1999-2000 Mitsubishi Montero Sport V6 3.5L?
Yes. Bosch 13822 is listed for the 1999-2000 Mitsubishi Montero Sport V6 3.5L, and also for the 1997-2000 Montero Sport V6 3.0L. Each entry calls for one sensor.
Is this Bosch premium oxygen sensor a heated narrow-band type?
Yes. Bosch 13822 is a heated, narrow-band switching-type sensor with an M18 - 1.5 thread and a 22 mm hex.
Does this oxygen sensor come with anti-seize on the threads?
Yes, conductive anti-seize is pre-applied to the threads. The wiring harness is included; a mounting bracket is not.
How quickly does this sensor start sending a signal after a cold start?
This sensor reaches operating temperature in under 10 seconds. The ECU then gets a signal quickly for closed-loop control.
