Bosch 13913 oxygen sensor for the 1984-1986 Ford Mustang 4-cylinder 2.3L or V8 5.0L and other vehicles measures the oxygen in the exhaust and reports the air-fuel ratio to the ECU. This upstream, heated narrow-band sensor supports stable combustion control and helps reduce emissions.
- Ceramic element and optimized heater control for consistent readings under heat and vibration
- Withstands exhaust gas up to 1,880°F
- Metal housing, integrated heater element and TSP coating to resist vibration, corrosion and contamination
- Reaches operating temperature in under 10 seconds for quick closed-loop control at cold start
Quick facts
- Part: Bosch 13913 oxygen sensor
- Fits: 1984-1986 Ford Mustang 4-cylinder 2.3L or V8 5.0L and other vehicles
- Position: Upstream
- Material: Metal
- Condition: New
A worn oxygen sensor can show up as a check engine light, a rough idle or poorer fuel economy. Before you replace it, rule out an exhaust leak near the sensor, a damaged connector and a misfire, since any of them can skew the readings or light the same lamp.
Fits
The 1984-1986 Ford Mustang 4-cylinder 2.3L or V8 5.0L and the 1985-1986 Ford Ranger 4-cylinder 2.3L and 1986 Ranger V6 2.9L all fit this sensor, and so do many other vehicles. It is also an oxygen sensor for the 1986 Ford Taurus V6 3.0L. If your car is not named here, run it through the "Vehicles it fits" section.
Specifications
Fit and size
- Position: Upstream
- Quantity per vehicle: 1
- Thread size: M18 - 1.5
- Hex size: 22 mm
- Length, sealing surface to end of connector: 10.6 in
Build and materials
- Type: Narrow-band, heated, switching-type
- Housing material: Metal
- Coating: TSP coating
- Condition: New
- Warranty: Bosch 1-year, unlimited-mileage warranty for non-commercial passenger cars and light trucks
In the box
One oxygen sensor with its wiring harness; a mounting bracket is not included. A vehicle takes one of these sensors, and this listing is a single sensor.
Installation notes
- The connector is made for direct fit.
- Conductive anti-seize is already applied to the threads.
Frequently Asked Questions
Is this the Ford Ranger oxygen sensor for the 1985-1986 Ranger 4-cylinder 2.3L and the 1986 Ranger V6 2.9L?
Yes. Bosch 13913 is listed for the 1985-1986 Ford Ranger 4-cylinder 2.3L and the 1986 Ranger V6 2.9L, one upstream sensor per truck.
Is this one of the Ford Mustang oxygen sensors for the 1984-1986 Mustang 4-cylinder 2.3L or V8 5.0L?
Yes. Bosch 13913 is listed for the 1984-1986 Ford Mustang 4-cylinder 2.3L or V8 5.0L, one per car. For another car, use the "Vehicles it fits" section.
Is this Bosch O2 sensor narrow-band or wideband?
Narrow-band. This heated switching-type sensor has an M18 - 1.5 thread and a 22 mm hex, and measures 10.6 in from sealing surface to the end of the connector.
Does this Bosch premium oxygen sensor come with its wiring harness?
Yes. Bosch 13913 includes a wiring harness. The mounting bracket is not included.
Does the 13913 sensor come with anti-seize on the threads?
Yes. Conductive anti-seize is already applied to the threads, and the connector is made for direct fit.
