Bosch 15383 oxygen sensor for the 2011-2014 Ford F-150 V6 3.7L, the 2011-2017 F-150 V6 3.5L, the 2015-2017 F-150 V6 2.7L or V8 5.0L and other vehicles measures the air-fuel ratio in the exhaust and reports it to the ECU. Its heated, narrow-band design helps keep combustion control stable and helps reduce emissions.
- Part of the Bosch Switching-Type Oxygen (O2) Sensors line
- Metal housing, integrated heater element and TSP coating to resist vibration, corrosion and contamination
- Withstands exhaust streams up to 1,880°F
- Reaches operating temperature in under 10 seconds for quick closed-loop control
Quick facts
- Part: Bosch 15383 oxygen sensor
- Fits: the 2011-2014 Ford F-150 V6 3.7L, the 2011-2017 F-150 V6 3.5L, the 2015-2017 F-150 V6 2.7L or V8 5.0L and other vehicles
- Position: Downstream, downstream left, downstream right, downstream front, downstream rear
- Material: Metal housing
- Condition: New
A check engine light, rough running or poor fuel economy can mean an oxygen sensor is worn, but a vacuum leak can look much the same.
Fits
Besides the vehicles named above, this downstream oxygen sensor is a direct-fit replacement for the 2011-2019 Ford Explorer V6 3.5L and the 2011-2012 Ford Escape 4-cylinder 2.5L or V6 3.0L.
Specifications
Fit and size
- Position: Downstream, downstream left, downstream right, downstream front, downstream rear
- Quantity per vehicle: 1 or 2, depending on the application
- Thread size: M18 - 1.5
- Length (sealing surface to end of connector): 17.5 in
Build and materials
- Sensor type: narrow-band, heated
- Housing material: Metal
- Wiring harness: included
- Condition: New
- Warranty: Bosch 1-year, unlimited-mileage warranty for non-commercial passenger cars and light trucks
In the box
One oxygen sensor with its wiring harness. This listing holds one sensor, and a vehicle takes one or two depending on the application. A mounting bracket and other accessories are not included, so plan on new hardware if your setup uses a bracket.
Installation notes
- Conductive anti-seize is pre-applied to the threads.
- The connector is made for direct plug-in, for quick installation.
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Is this Ford F-150 oxygen sensor for 2011-2017 trucks with the V6 3.5L?
Yes, Bosch 15383 fits the 2011-2017 Ford F-150 V6 3.5L, and that truck takes two. If your car isn't named on this page, look it up in the “Vehicles it fits” section by year and engine.
Is this Bosch premium oxygen sensor heated?
Yes. Bosch 15383 is a heated narrow-band sensor with an integrated heater element, and it reaches operating temperature in under 10 seconds.
What thread does this Bosch O2 sensor have?
Bosch 15383 has an M18 - 1.5 thread. The length from the sealing surface to the end of the connector is 17.5 in.
Does this oxygen sensor come with anti-seize on the threads?
Yes, the threads have pre-applied conductive anti-seize, and the sensor comes with its wiring harness. A mounting bracket is not included.
How long is the warranty on the Bosch 15383 oxygen sensor?
Bosch backs it with a 1-year, unlimited-mileage warranty for non-commercial passenger cars and light trucks.
