Bosch 15672 oxygen sensor for the 2007-2011 Toyota Camry 4-cylinder 2.4L, the 2007-2017 Camry V6 3.5L, the 2010-2017 Camry 4-cylinder 2.5L and other vehicles measures oxygen in the exhaust and sends air-fuel-ratio readings to the ECU. The ECU uses those readings to help keep combustion stable and emissions down.
- Heated, narrow-band Switching-Type sensor that gives the ECU air-fuel-ratio feedback
- Reaches operating temperature in under 10 seconds for quick closed-loop control
- Metal housing and TSP coating resist vibration, corrosion and contamination
- Built to withstand exhaust streams up to 1,880°F
Quick facts
- Part: Bosch 15672 oxygen sensor
- Fits: the 2007-2011 Toyota Camry 4-cylinder 2.4L, the 2007-2017 Camry V6 3.5L, the 2010-2017 Camry 4-cylinder 2.5L and other vehicles
- Position: Downstream, downstream left, downstream right
- Material: Metal housing
- Condition: New
A check-engine light, a rougher idle or worse fuel economy can come from a failing oxygen sensor, but other problems can look the same. Before replacing it, look over the wiring and connector for damage with the engine off and cool. If the sensor is the cause, this one replaces it.
Fits
It is also an oxygen sensor for the 2009-2012 Toyota Corolla 4-cylinder 2.4L and the 2005-2015 Toyota Tacoma 4-cylinder 2.7L or V6 4.0L. The engines named here take one sensor apiece, and this listing is one sensor. If your car is not named here, look it up in the "Vehicles it fits" section and match your engine.
Specifications
Fit and size
- Position: downstream, downstream left, downstream right
- Quantity per application: 1 or 2, depending on the vehicle
- Thread size: M18 - 1.5
- Hex size: 22 mm
- Length (sealing surface to end of connector): 10.6 in
Build and materials
- Sensor type: narrow-band, heated
- Housing material: metal
- Condition: new
- Warranty: Bosch 1-year, unlimited-mileage warranty for non-commercial passenger cars and light trucks
In the box
One oxygen sensor with its wiring harness. A mounting bracket is not included.
Installation notes
- Direct-fit connectors for quick installation.
- Conductive anti-seize comes pre-applied on the threads.
Frequently Asked Questions
Is this the right oxygen sensor for a 2010-2017 Toyota Camry 4-cylinder 2.5L?
Yes. Bosch 15672 is listed for the 2010-2017 Toyota Camry 4-cylinder 2.5L, which takes one sensor. For any other car, look it up in the "Vehicles it fits" section.
Does the Bosch O2 sensor come with its wiring harness?
Yes. Bosch 15672 includes its wiring harness. A mounting bracket is not included.
What thread size and wrench size does this oxygen sensor use?
This sensor has an M18 - 1.5 thread and a 22 mm hex. Its length from the sealing surface to the end of the connector is 10.6 in.
How quickly does this Bosch premium oxygen sensor warm up?
Its heater brings the sensor to operating temperature in under 10 seconds, so the ECU gets a signal quickly for closed-loop control. It is a heated, narrow-band sensor.
Does Bosch back this oxygen sensor with a warranty?
Yes. Bosch gives a 1-year, unlimited-mileage warranty on this oxygen sensor for non-commercial passenger cars and light trucks.
