Bosch 16132 rear oxygen sensor for the 1999-2001 Volkswagen Jetta 4-cylinder 2.0L, the 2000-2001 Jetta 4-cylinder 1.8L and other vehicles reads the oxygen content of the exhaust and reports it to the ECU. As a heated Bosch O2 sensor, it helps the ECU hold stable combustion control and keep emissions down.
- Switching-type narrow-band design with an integrated heater element
- Reaches operating temperature in under 10 seconds for fast signal availability on cold starts
- Built to withstand exhaust streams up to 1,880°F, with a metal housing and TSP coating that resist vibration, corrosion and contamination
- Advanced ceramic element and optimized heater control for steady output under heat and vibration
Quick facts
- Part: Bosch 16132 oxygen sensor
- Fits: the 1999-2001 Volkswagen Jetta 4-cylinder 2.0L, the 2000-2001 Jetta 4-cylinder 1.8L and other vehicles
- Position: Upstream, downstream, downstream rear
- Material: Metal housing
- Condition: New
A failing oxygen sensor can bring on a check engine light, rough running or poorer fuel economy, though each of those can come from other causes. With the engine off and cool, look the wiring and connector over for damage before you replace anything. If this sensor is the cause, it replaces the old one. A shop can test the signal with the engine running.
Fits
The 1999-2001 Volkswagen Golf 4-cylinder 2.0L, the 2000-2001 Golf 4-cylinder 1.8L, the 2005 Volkswagen Beetle 4-cylinder 1.8L and the 2006-2010 Beetle 5-cylinder 2.5L all take this oxygen sensor, along with many other vehicles. If your car is not named here, look up its year and engine in the "Vehicles it fits" section. This listing is one sensor, and the 1999-2001 Volkswagen Jetta 4-cylinder 2.0L takes one.
Specifications
Fit and size
- Position: Upstream, downstream, downstream rear
- Thread size: M18 - 1.5
- Hex size: 22 mm
- Length, sealing surface to end of connector: 28.7 in
Build and materials
- Sensor type: Narrow-band, heated
- Housing material: Metal
- Wiring harness: included
- Condition: New
- Warranty: Bosch 1-year, unlimited-mileage warranty for non-commercial passenger cars and light trucks
In the box
One oxygen sensor with its wiring harness. A mounting bracket is not included.
Installation notes
- Conductive anti-seize is pre-applied to the threads.
- Direct-fit connectors are engineered for quick installation.
Frequently Asked Questions
Is Bosch 16132 one of the VW Jetta oxygen sensors for a 1999-2001 Jetta 4-cylinder 2.0L?
Yes, Bosch 16132 fits the 1999-2001 Volkswagen Jetta 4-cylinder 2.0L and the 2000-2001 Jetta 4-cylinder 1.8L; look up other cars by year and engine in the "Vehicles it fits" section.
Will this work as a VW Golf oxygen sensor on a 1999-2001 Golf 4-cylinder 2.0L?
Yes. It fits the 1999-2001 Volkswagen Golf 4-cylinder 2.0L and the 2000-2001 Golf 4-cylinder 1.8L, and each takes one sensor.
Does the wiring harness come with this oxygen sensor?
Yes, the listing includes the sensor with its wiring harness; a mounting bracket is not included.
What thread size and hex size does this oxygen sensor have?
Bosch 16132 has an M18 - 1.5 thread and a 22 mm hex. Its length from the sealing surface to the end of the connector is 28.7 in.
Is anti-seize already on the threads of this oxygen sensor?
Yes. The threads come with conductive anti-seize applied, and the direct-fit connectors are made for a quick swap.
