Bosch 16276 right oxygen sensor for the 2004-2008 Chrysler Crossfire V6 3.2L and other vehicles measures the air-fuel ratio in the exhaust and sends it to the ECU. The ECU uses that reading to keep combustion stable and help reduce emissions.
- Premium Switching-Type Oxygen (O2) Sensors line, narrow-band heated design with an integrated heater element
- Metal housing built to withstand exhaust streams up to 1,880°F
- TSP coating to resist vibration, corrosion and contamination
- Reaches operating temperature in under 10 seconds for quick closed-loop control
- Advanced ceramic elements and optimized heater control for consistent performance under thermal and vibration loads
Quick facts
- Part: Bosch 16276 oxygen sensor
- Fits: 2004-2008 Chrysler Crossfire V6 3.2L and other vehicles
- Position: Right
- Material: Metal housing
- Condition: New
A worn oxygen sensor can show up as a check engine light, poor fuel economy or a rough idle. Before you replace the sensor, rule out an exhaust leak ahead of it and damaged wiring or a loose connector, since either can throw off the readings. If a failed oxygen sensor is the cause, this one replaces it.
Fits
This listing is one sensor. The fitment includes the 2004-2008 Chrysler Crossfire V6 3.2L, which takes one, plus the 2001-2003 Mercedes-Benz CL500 V8 5.0L and the 2001-2006 Mercedes-Benz CL55 AMG V8 5.5L, which take two each. If your vehicle is not one of those, find it in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: right
- Quantity per vehicle: 1 or 2, depending on the vehicle
- Thread size: M18 - 1.5 (threaded mounting)
- Hex size: 22 mm
- Overall length: 13.8 in
- Length, sealing surface to end of connector: 12.6 in
- Wiring harness length: 10.4 in
- Connector: round, female, 4 terminals (pin type)
Build and materials
- Sensor type: narrow-band heated
- Housing material: metal
- Condition: new
- Warranty: Bosch 1-year, unlimited-mileage warranty for non-commercial passenger cars and light trucks
- Country of origin: United States
In the box
One oxygen sensor with its wiring harness. A mounting bracket is not included.
Installation notes
- Conductive anti-seize is pre-applied to the threads.
- Direct-fit connector, engineered for quick installation.
Frequently Asked Questions
Is Bosch 16276 the right oxygen sensor for the 2004-2008 Chrysler Crossfire V6 3.2L?
Yes. Bosch 16276 fits the 2004-2008 Chrysler Crossfire V6 3.2L, which takes one. Look up other vehicles in the "Vehicles it fits" section.
Does this Bosch O2 sensor come with a wiring harness?
Yes. Bosch 16276 includes its wiring harness, 10.4 in long. A mounting bracket is not included.
What thread size and hex size does this oxygen sensor have?
This sensor has an M18 - 1.5 thread and a 22 mm hex. Its overall length is 13.8 in.
Is this Bosch premium oxygen sensor a heated narrow-band type?
Yes. Bosch 16276 is a narrow-band heated sensor with an integrated heater element, and it reaches operating temperature in under 10 seconds.
Is anti-seize already on the threads of this oxygen sensor?
Yes. Conductive anti-seize is pre-applied to the threads of this sensor.
