Bosch Oxygen Sensor P/N:15160
Bosch 16511 oxygen sensor for the 2003 Nissan Sentra 4-cylinder 1.8L is a heated Bosch O2 sensor that gives the ECU air-fuel-ratio readings. It sits upstream in the exhaust, where those readings help the ECU hold stable combustion control and help reduce emissions.
A worn oxygen sensor can show up as a check engine light, a rough idle or poorer fuel economy, but those signs have other causes too. With the engine off and cool, look over the wiring and connector for damage first, and let a shop test the sensor signal.
This upstream sensor fits the 2003 Nissan Sentra 4-cylinder 1.8L.
Fit and size
Build and materials
One oxygen sensor with its wiring harness; a mounting bracket is not included. The 2003 Nissan Sentra 4-cylinder 1.8L takes one.
Is Bosch 16511 the oxygen sensor for the 2003 Nissan Sentra 4-cylinder 1.8L?
Yes. Bosch 16511 is an upstream oxygen sensor listed for the 2003 Nissan Sentra 4-cylinder 1.8L, and that engine takes one.
Does this oxygen sensor come with its wiring harness?
Yes, the wiring harness is included. A mounting bracket is not included.
Is this Bosch premium oxygen sensor heated?
Yes. Bosch 16511 is a narrow-band heated sensor with an integrated heater element, an M18 - 1.5 thread and a 22 mm hex.
How can I tell if the upstream oxygen sensor is going bad?
A check engine light, rough idle or poorer fuel economy can be signs of a failing sensor. A shop can read the sensor's signal with a scan tool to confirm.
Does this oxygen sensor need anti-seize on the threads?
No. Conductive anti-seize is already pre-applied to the threads, and the connectors are direct-fit.
Published by the manufacturer of this part. Links open in a new tab.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.