Keep brake fluid moving from the chassis to the front brakes with the Centric Parts brake hydraulic hose, part number 150.66019. It is a direct-fit replacement for the listed applications and is cataloged for the front position. It fits many vehicles, among them the 1982-1991 Chevrolet S10, the 1983-1991 Chevrolet S10 Blazer and the 1983-1991 GMC S15 Jimmy. See the "Vehicles it fits" section for the full list.
A brake hydraulic hose is the flexible link between the vehicle's rigid brake line and the brake at the wheel. It carries pressurized brake fluid while flexing with suspension travel and steering movement. Centric positions its brake hoses as offering the widest application coverage in the aftermarket and as some of the highest-quality aftermarket replacements available.
Signs this part may need replacing: cracking, bulging or chafing on the hose, fluid seepage at the fittings, a soft or spongy brake pedal, or a pull to one side when braking. Other brake components can cause these symptoms too, so diagnose the cause before replacing the hose. When one front hose is worn, it is good practice to inspect the opposite side at the same time.
Interchange: B916990 · HB86019 · 77327 · 513062 · 1698 · 18031946 · 18J235 · 8744019 · H38107 · SP6215 · E15571024 · BH1695 · 38107 · 19173207 · 9767269 · 4538107 · BH38107 · 2201017 · 221017 · BH106348 · F106348
This part cross-references / interchanges with the following part numbers:
What does a brake hydraulic hose do?
It carries pressurized brake fluid from the rigid brake line to the front brake at the wheel. It flexes as the suspension and steering move.
Which vehicles does Centric 150.66019 fit?
It fits many vehicles, including the 1982-1991 Chevrolet S10, the 1983-1991 Chevrolet S10 Blazer and the 1983-1991 GMC S15 Jimmy. See the "Vehicles it fits" section for the full list.
Is this a front or rear brake hose?
It is cataloged for the front position on the listed applications.
What are signs a brake hose may need replacing?
Cracks, bulges, leaks at the fittings, a spongy pedal or a pull when braking can be signs. Diagnose first, because other brake parts can cause these symptoms.
What should I know about installing it?
Follow the vehicle service information for the correct fittings, sealing washers and torque. Bleed the brake system after installation so no air remains in the lines.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
