Centric Parts Brake Hydraulic Hose P/N:150.40016
Keep brake fluid moving from the chassis brake line to the front brake with the Centric Parts brake hydraulic hose, part number 150.65057, cataloged for the front right position. It fits many vehicles, among them the 1989-1994 Ford Ranger, 1994 Mazda B2300 and 1994 Mazda B3000, as a direct-fit replacement for the listed applications. See the "Vehicles it fits" section for the full list and engine details.
A brake hydraulic hose is the flexible link in the brake system. It carries pressurized brake fluid between the rigid brake line and the brake at the wheel, and it flexes to allow for suspension and steering movement. Centric says its brake hoses offer the widest application coverage in the aftermarket and places them among the highest-quality aftermarket replacements.
Signs a brake hose may need replacing include visible cracking, swelling or bulging, brake fluid seepage at the hose or its ends, a soft or spongy pedal, or the vehicle pulling to one side under braking. These symptoms can have other causes, so inspect the brake system before you replace parts. If a worn hose is the cause, this unit replaces it. Bleed the brakes after installation as directed by the vehicle service information.
Interchange: B917475 · HB85057 · 0731556 · 77793 · PBH77793 · 513124 · 3249 · 18032353 · 18J642 · 8742057 · H38627 · SP8584 · E15570062 · BH2211 · 38627 · E9TZ2078A · ZZM043980 · 4538627 · BH38627 · 2201086 · 221086 · BH120539 · F120539
This part cross-references / interchanges with the following part numbers:
Which vehicles does this Centric brake hose fit?
It fits many vehicles, including the 1989-1994 Ford Ranger, 1994 Mazda B2300 and 1994 Mazda B3000. See the "Vehicles it fits" section for the full list and engine details.
Which wheel position is part number 150.65057 for?
The catalog lists this brake hydraulic hose for the front right position.
What does a brake hydraulic hose do?
It is the flexible section of the brake line. It carries pressurized brake fluid to the brake at the wheel and flexes to allow for suspension and steering movement.
What are the signs a brake hose may need replacing?
Cracks, bulging, fluid seepage, a spongy pedal or pulling to one side under braking can be signs of a worn hose. Other brake faults can cause the same symptoms, so inspect the system before you replace parts.
Do I need to bleed the brakes after installing it?
Yes. Replacing a hose opens the hydraulic system and lets air in, so bleed the brakes afterward. Follow the vehicle service information for the correct fasteners and torque values.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.