Centric Parts Brake Hydraulic Hose P/N:150.40016
Keep brake fluid flowing to the rear brake with the Centric Parts brake hydraulic hose, part number 150.40338. It is made for the rear right position and is a direct-fit replacement for the 1998-2002 Honda Accord. See the "Vehicles it fits" section for engine-specific details.
A brake hydraulic hose is the flexible section of the brake system. It carries brake fluid from the vehicle's rigid brake line to the wheel's brake assembly and flexes as the suspension and wheel move. Centric says its brake hoses offer the widest application coverage in the aftermarket and are among its highest-quality aftermarket replacements.
Signs a brake hose may need replacing include cracks, bulges or chafing on the hose, brake fluid seeping at the hose, or a soft, spongy pedal. If a worn hose is the cause, this part replaces it. We recommend replacing both rear hoses at the same time. Bleed the brake system after installation. Check the vehicle service information for the correct fasteners and fittings, and for whether they can be reused.
Interchange: B917846 · HB54338 · 8708338 · H381099 · 381099 · 01466S84A51 · BH381099 · 223508 · BH139096 · F139096
This part cross-references / interchanges with the following part numbers:
What does a brake hydraulic hose do?
It is the flexible section of the brake system. It carries brake fluid from the rigid brake line to the wheel's brake assembly while the suspension and wheel move.
Which position does Centric part 150.40338 fit?
This Centric hose is made for the rear right position. We recommend replacing both rear hoses at the same time.
Will this brake hose fit a 1998-2002 Honda Accord?
Yes. It is a direct-fit replacement for the 1998-2002 Honda Accord. Check the "Vehicles it fits" section for engine-specific fitment details.
What are signs a brake hose may need replacing?
Common signs include cracks, bulges or chafing on the hose, fluid seepage and a soft or spongy pedal. Other parts can cause these symptoms, so diagnose the brake system first.
Do I need to bleed the brakes after installing it?
Yes. Opening the hydraulic system lets air in, so bleed the brakes after installation. Follow the vehicle service information for torque specs and the correct fasteners and fittings.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.