Keep brake fluid flowing to the rear right wheel with the Sunsong brake hose, part number 2201837. This rear right brake hydraulic hose is a direct-fit replacement for the 2009-2010 Ford F-150 and 2009-2010 Ford Lobo. See the "Vehicles it fits" section for engine details.
A brake hydraulic hose is the flexible link that carries brake fluid under pressure from the rigid brake lines to the brake at the wheel, flexing as the suspension and wheel move. Sunsong designs this hose for exact form, fit and function.
- Installation pieces: Brackets, grommets, molded plastic guards, wire clips and protective sleeves are included where the application requires them, intended to bring the wearable pieces back to original condition.
- Standards: Meets or exceeds DOT, FMVSS 106 and SAE J1401 standards.
- Corrosion protection: The tubing is made from high-grade steel and electroplated with a zinc coating to resist corrosion and rust from high humidity, road salt, water and grime.
- Pressure tested: Every hose goes through a high-pressure quality assurance test before it leaves the factory. Hoses with banjo end fittings also come with new copper washers for proper sealing.
Signs a brake hose may need replacing include brake fluid seepage at the hose or its fittings, a cracked, swollen or bulging hose, and a soft or spongy brake pedal. Diagnose the cause before replacing parts, and bleed the brake system after installation as directed by the vehicle service information.
Interchange: 150.65469 · 150.65505 · 350-54679
15065469 · 15065505 · 35054679 · BH621806 · SP11106 · BHA621806 · H621462 · 777590 · 9L3Z2267D · AL3Z2267C · 682541 · 682961 · BH382939 · BH144549
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
Which vehicles does this Sunsong brake hydraulic hose fit?
It is listed for the rear right position on the 2009-2010 Ford F-150 and 2009-2010 Ford Lobo. See the "Vehicles it fits" section for engine details.
Does the hose come with brackets or copper washers?
Brackets, grommets, molded plastic guards, wire clips and protective sleeves are included where the application requires them. Hoses with banjo end fittings include new copper washers.
What standards does this brake hose meet?
Sunsong states its brake hoses meet or exceed DOT, FMVSS 106 and SAE J1401 standards. Each hose is also high-pressure tested before it leaves the factory.
How is the tubing protected against corrosion?
The tubing is made from high-grade steel and electroplated with a zinc coating to resist corrosion and rust from high humidity, road salt, water and grime.
What are signs a brake hose may need replacing?
Common signs include brake fluid leaks at the hose or fittings, a cracked or bulging hose, and a soft or spongy pedal. Diagnose the cause first, and bleed the brakes after installing.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review