Keep brake fluid moving to the front right wheel with the Sunsong brake hose, part number 2201012. This brake hydraulic hose is a direct-fit replacement for the front right position on the 1980-1989 Ford Bronco, 1980-1989 Ford F-150, 1980-1985 Ford F-250 and 1980-1983 Ford F-100.
A brake hose is the flexible link between the vehicle's rigid brake lines and the brake at the wheel. It carries pressurized brake fluid while allowing for suspension and steering movement. Sunsong is a vertically integrated manufacturer of automotive fluid transfer hoses and lines, and it builds each hose to deliver exact form, fit and function.
- Standards: Meets or exceeds DOT, Federal Vehicle Safety Standards (FMVSS 106) and SAE J1401 standards.
- Pressure tested: Every hose goes through a high-pressure quality assurance test before it leaves the factory.
- Installation pieces: Brackets, grommets, molded plastic guards, wire clips and protective sleeves are included as required for the application. Hoses with banjo end fittings come with new copper washers for proper sealing.
- Corrosion protection: Sunsong's tubing is made from high-grade steel and electroplated with a zinc coating. The coating resists corrosion and rust from humidity, road salt, water and grime.
Signs a brake hose may need replacing include cracking, bulging or chafing on the hose, brake fluid leaking near the wheel, or a soft, spongy pedal. If a worn front right hose is causing the problem, this Sunsong hose replaces it. See the "Vehicles it fits" section for engine details on each application.
Interchange: 1474-41112 · 150.65033
147441112 · 15065033 · 18J2019 · 77249 · BH36984 · SP5874 · BHA36984 · H36984 · E0TZ2078B · F0TZ2078D · 36984 · BH103200
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
Which vehicles does the Sunsong brake hydraulic hose 2201012 fit?
It is listed for the front right position on the 1980-1989 Ford Bronco and F-150, the 1980-1985 Ford F-250 and the 1980-1983 Ford F-100.
What standards does this brake hose meet?
Sunsong states that its brake hoses meet or exceed DOT, Federal Vehicle Safety Standards (FMVSS 106) and SAE J1401 standards.
Does it come with brackets or copper washers?
Brackets, grommets, guards, clips and sleeves are included as required for the application. Sunsong hoses with banjo end fittings include new copper washers.
How do I know my brake hose may need replacing?
Common signs include a cracked, bulging or chafed hose, fluid seeping near the wheel, or a spongy pedal. Inspect the brake system to confirm the cause before replacing parts.
Is the hose tested before it ships?
Yes. Sunsong puts every hose through a high-pressure quality assurance test before it leaves the factory.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review