Sunsong Brake Hydraulic Hose P/N:2205964
Keep brake fluid flowing to the rear right wheel with the Sunsong brake hose, part number 2204045. This rear right brake hydraulic hose is a direct-fit replacement for the 2008-2015 Chevrolet Captiva Sport, 2008-2010 Saturn Vue, 2017 Chevrolet Equinox and 2017 GMC Terrain. See the Buyer's Guide tab for engine details.
A brake hydraulic hose is the flexible link that carries pressurized brake fluid from the vehicle's rigid brake line to the brake at the wheel, and it flexes as the suspension moves. Sunsong is a vertically integrated manufacturer of automotive fluid transfer hoses and lines, and it designs its hoses for exact form, fit and function.
Signs a brake hose may need replacing include visible cracking or bulging, fluid seepage at the hose or its fittings, or a soft, spongy brake pedal. Other brake components can cause similar symptoms, so diagnose the cause before replacing any part. Bleed the brake system after installation, following the vehicle service information.
Interchange: 1474-324621 · 150.62451 · 350-53020
1474324621 · 15062451 · 35053020 · 18J4542 · BH621454 · SP11042 · BHA621454 · H621454 · 777278 · 96625922 · 682391 · BH382745 · BH144175
This part cross-references / interchanges with the following part numbers:
What does the Sunsong brake hydraulic hose 2204045 do?
It carries pressurized brake fluid from the rigid brake line to the brake at the rear right wheel. It flexes as the suspension moves.
Which vehicles does this hose fit?
It fits the rear right position on the 2008-2015 Chevrolet Captiva Sport, 2008-2010 Saturn Vue, 2017 Chevrolet Equinox and 2017 GMC Terrain. See the Buyer's Guide tab for engine details.
What standards does this brake hose meet?
Sunsong states that its brake hoses meet or exceed DOT, FMVSS 106 and SAE J1401 standards. Each hose is high-pressure tested before it leaves the factory.
Are copper washers and mounting hardware included?
If the hose uses banjo end fittings, new copper washers are included. Brackets, grommets, guards, clips and sleeves are supplied only where the application requires them.
Do I need to bleed the brakes after installing it?
Yes. Replacing a brake hose opens the hydraulic system, so bleed the brakes and check for leaks according to the vehicle service information before you drive.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.