Front Left CV Axle for 1990-1993 Honda Accord - A1 CARDONE 66-4066

$119.99

Vehicles this part fits

    Part number: 66-4066
    UPC: 082617632478
    Condition: New
    Weight: 20.78 LBS
    Item Package Quantity: 1
    $119.99
    Adding to cart… The item has been added

    Have questions?

    CARDONE New CV Axle Assembly P/N:66-4066
    CARDONE New CV Axle Assembly P/N:66-4066
    $119.99
    $119.99

    A1 CARDONE 66-4066 front left CV axle for the 1990-1993 Honda Accord carries drive torque from the transaxle to the front left wheel. This new CV axle assembly comes with both CV joints.

    • Neoprene boots with extra bellows where needed to resist bellow stress and cracking, the leading cause of boot failure
    • Each shaft individually verified for straightness for vibration-free performance at all speeds
    • New axle retaining nut supplied, since the original nut is likely worn or stripped
    • Boot clamps pneumatically crimped to seal the boot to the housing
    • Grease that withstands high-temperature and high-torque demands
    • Precision-rolled splines and threads for fit in the hub, transmission and axle nut

    Quick facts

    • Part: A1 CARDONE 66-4066 CV axle
    • Also called: CV axle assembly
    • Fits: 1990-1993 Honda Accord
    • Position: Front left
    • Material: Steel shaft, neoprene boots
    • Condition: New

    Clicking when you turn hard under power, grease thrown from a torn boot, or a vibration when you accelerate can mean the axle is worn. Before you replace it, rule out a broken engine mount, since a shifted drivetrain can bind the inner joint and give similar symptoms.

    Fits

    This CV axle fits the 1990-1993 Honda Accord, which takes one on the front left; the front right is a separate part.

    Specifications

    Fit and size

    • Position: Front left
    • Quantity per vehicle: 1
    • Compressed length: 37.75 in (958.85 mm)
    • Shaft diameter: 24.5 mm (0.965 in)
    • Inboard joint: splined, 27 splines
    • Outboard joint: splined, 28 splines
    • Axle nut: hex, M24x1.5 thread, 36 mm socket size

    Build and materials

    • Condition: New
    • Shaft material: Steel
    • Boot material: Neoprene, 3 ribs
    • CV joints: included
    • ABS tone ring: included, toothed, 50 teeth
    • Country of origin: China

    In the box

    One complete CV axle and one instruction sheet.

    Installation notes

    • Remove and install one CV axle at a time.
    • Use a torque wrench on the retaining nut, never an impact wrench, and torque it to the manufacturer's specifications.
    • Install new transaxle seals when replacing a CV axle to avoid leaks.

    Interchange: 44011SM1983 · 44011SM1984 · 44011SM1A82 · 44011SM4981 · 44011SM4983 · 44011SM4J83

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    44011SM1983, 44011SM1984, 44011SM1A82, 44011SM4981, 44011SM4983, 44011SM4J83

    Frequently Asked Questions

    Does the A1 CARDONE 66-4066 fit the front left side of a 1990-1993 Honda Accord?

    Yes. The A1 CARDONE 66-4066 is the front left CV axle for the 1990-1993 Honda Accord, which takes one on this side; the front right is a separate part.

    Does the A1 CARDONE CV drive axle come with a new axle nut?

    Yes. The A1 CARDONE 66-4066 comes as one complete CV axle with a new M24x1.5 hex axle nut and an instruction sheet.

    Does this CV axle include an ABS tone ring?

    Yes. This CV axle includes a toothed ABS tone ring with 50 teeth, so a car with ABS has the ring on the axle.

    How are A1 CARDONE axles checked for straightness?

    Each shaft is individually verified for straightness, and the axle's measurements are validated after assembly. This is meant to give vibration-free performance at all speeds.

    Can I use an impact wrench to tighten the retaining nut on this CV axle?

    No. Use a torque wrench and torque the nut to the manufacturer's specifications; also install new transaxle seals when replacing the axle, to avoid leaks.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review