Rear Right CV Axle for 2012 Honda CR-V - A1 CARDONE 66-4346

$161.99

Vehicles this part fits

    Part number: 66-4346
    UPC: 884548309043
    Condition: New
    Weight: 12.50 LBS
    Item Package Quantity: 1
    $161.99
    Adding to cart… The item has been added

    Have questions?

    CARDONE New CV Axle Assembly P/N:66-4346
    CARDONE New CV Axle Assembly P/N:66-4346
    $161.99
    $161.99

    A1 CARDONE 66-4346 rear right CV axle for the 2012 Honda CR-V carries drive torque to the wheel hub as the suspension moves. The A1 CARDONE CV axle assembly was designed around why original axles fail and meets O.E. form, fit and function.

    • Neoprene boots with additional bellows where needed to resist bellow stress and cracking
    • Shaft individually verified for straightness for vibration-free performance at all speeds
    • Axle measurements validated after assembly to confirm a proper fit
    • Boot clamps pneumatically crimped to seal the boot to the housing
    • Grease made to withstand high-temperature and high-torque demands
    • Precision-rolled splines and threads for proper fit in the hub, transmission and axle nut

    Quick facts

    • Part: A1 CARDONE 66-4346 CV axle
    • Also called: CV axle assembly
    • Fits: 2012 Honda CR-V
    • Position: Rear right
    • Material: Steel shaft, neoprene boot
    • Condition: New

    Clicking when you turn under power, a thump or vibration on acceleration, or grease around the boot can mean this axle is worn. A broken engine mount can leave the inner joint binding, and a damaged ABS sensor ring can set the ABS light, so find the cause before replacing the axle.

    Fits

    It fits the 2012 Honda CR-V, which takes one axle at this rear right position. This listing is one axle; the rear left is a separate part, and both sides are normally replaced together.

    Specifications

    Fit and size

    • Position: Rear right
    • Quantity per application: 1
    • Shaft diameter: 22 mm (0.866 in)
    • Compressed length: 811.5 mm (31.949 in)
    • Inboard spline quantity: 20
    • Outboard spline quantity: 23
    • Axle nut: hex, M22x1.5 thread, 32 mm socket size

    Build and materials

    • Shaft material: Steel
    • Boot material: Neoprene, 3 ribs
    • Joints: splined inboard and outboard, CV joints included
    • ABS tone ring: not included
    • Condition: New
    • Country of origin: China

    In the box

    One complete CV axle with a new axle nut and an instruction sheet.

    Installation notes

    • Discard the old locking-style (prevailing torque) nut; it should never be reused.
    • Remove and install one CV axle at a time, and never let an axle hang unsupported, since that can separate it and damage the inner joint.
    • Tighten the axle nut with a torque wrench to the manufacturer's specification, never with an impact wrench.
    • Install new transaxle seals to avoid leaking.

    Interchange: 42310T0A000

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    42310T0A000

    Frequently Asked Questions

    Does the A1 CARDONE 66-4346 fit a 2012 Honda CR-V?

    Yes, A1 CARDONE 66-4346 is the rear right CV axle for the 2012 Honda CR-V, which takes one at that position. The rear left axle is a separate part.

    Does this A1 CARDONE CV drive axle come with a new axle nut?

    Yes, A1 CARDONE 66-4346 includes a new hex axle nut (M22x1.5 thread, 32 mm socket size) and an instruction sheet. The ABS tone ring is not included.

    Do A1 CARDONE axles like this one have neoprene boots?

    Yes, the boot on this axle is neoprene and the shaft is steel, 22 mm in diameter. Neoprene boots add extra bellows where needed to resist bellow stress and cracking.

    What can clicking when turning mean on a CV axle?

    Clicking or snapping when you turn under power can mean the outer joint is worn. A torn boot that lets grease out and dirt in can also damage the joint, so have it inspected promptly.

    Is 42310T0A000 an interchange number for this CV axle?

    Yes, 42310T0A000 is listed as an interchange number for A1 CARDONE 66-4346. It is another manufacturer's number for the same rear right axle.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review