Front Left CV Axle for 2011-2013 Nissan Rogue & More - A1 CARDONE 66-6262

$74.99

Vehicles this part fits

    Part number: 66-6262
    UPC: 884548012479
    Condition: New
    Weight: 16.00 LBS
    Item Package Quantity: 1
    $74.99
    Adding to cart… The item has been added

    Have questions?

    CARDONE New CV Axle Assembly P/N:66-6262
    CARDONE New CV Axle Assembly P/N:66-6262
    $74.99
    $74.99

    A1 CARDONE 66-6262 front left CV axle for the 2011-2013 Nissan Rogue and other vehicles carries drive torque from the transaxle to the wheel. Also called a CV axle assembly, it is sold as a complete axle with its CV joints and a new axle retaining nut.

    • Neoprene boots with additional bellows where needed, to resist bellow stress and cracking, the leading cause of boot failure
    • Each axle shaft is individually verified for straightness to help keep vibration down at all speeds
    • Boot clamps are pneumatically crimped to seal the boot to the housing
    • Grease that withstands high temperature and high torque
    • Splines and threads are precision rolled for correct fit in the hub, the transmission and the axle nut
    • Transmission seal diameter is precision-machined after heat treatment to promote long seal life

    Quick facts

    • Part: A1 CARDONE 66-6262 CV axle
    • Also called: CV axle assembly
    • Fits: 2011-2013 Nissan Rogue and other vehicles
    • Position: Front left
    • Material: Steel shaft, neoprene boots
    • Condition: New

    Clicking or snapping when you turn hard, grease thrown onto the chassis or suspension, or vibration under acceleration can mean this axle is worn, though a broken engine mount or a worn hub bearing can be behind some of those signs too.

    Fits

    The 2011-2013 Nissan Rogue, 2007-2012 Nissan Sentra and 2007-2013 Nissan Altima all fit this CV axle, along with more vehicles. Look up your own year and model in the "Vehicles it fits" section on this page. This listing is one axle for the front left; the 2011-2013 Nissan Rogue takes one on that side, and the front right is a separate part that is normally replaced in the same visit.

    Specifications

    Fit and size

    • Position: Front left
    • Quantity per vehicle: 1
    • Shaft diameter: 27 mm (1.063 in)
    • Compressed length: 665.16 mm (26.188 in)
    • Splines: 27 inboard, 29 outboard
    • Axle nut: hex, M24x1.5 thread, 32 mm (1.26 in) socket

    Build and materials

    • Condition: New
    • Shaft material: Steel
    • Boot material: Neoprene, 5 ribs
    • CV joints: included
    • ABS tone ring: not included
    • Country of origin: China

    In the box

    One complete CV axle with its CV joints, a new hex axle retaining nut and an instruction sheet.

    Installation notes

    • Install the new retaining nut and discard the old one; a prevailing torque lock nut should never be reused.
    • Tighten the nut with a torque wrench to the vehicle maker's specification, never with an impact wrench.
    • Fit new transaxle seals, and never leave the axle hanging unsupported while you work.
    • Remove and install one axle at a time, and use a press-type tool on a stuck stub shaft rather than a hammer.

    Interchange: 39101ET80C · 39101JA010 · 39101JG02C

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    39101ET80C, 39101JA010, 39101JG02C

    Frequently Asked Questions

    Is this 2011-2013 Nissan Rogue cv axle for the left or the right side?

    It is for the front left. A1 CARDONE 66-6262 fits the 2011-2013 Nissan Rogue on that side, and the front right is a separate part.

    Is this a cv axle for the 2007-2012 Nissan Sentra?

    Yes. A1 CARDONE 66-6262 fits the 2007-2012 Nissan Sentra on the front left, and the front right side is ordered separately.

    Do A1 CARDONE axles come with a new retaining nut?

    Yes. This front left axle includes a new hex axle retaining nut, its CV joints and an instruction sheet. The ABS tone ring is not included.

    What nut thread and socket size does this cv axle use?

    The hex axle nut has an M24x1.5 thread and takes a 32 mm (1.26 in) socket. The shaft diameter is 27 mm (1.063 in).

    Which nut goes on when I install this axle?

    Use the new nut supplied with this axle, since lock nuts of the prevailing-torque type are one-use. Tighten it with a torque wrench rather than an impact wrench.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review