Front Left CV Axle for 2007-2013 Mini Cooper - A1 CARDONE 66-9324

$284.99

Vehicles this part fits

    Part number: 66-9324
    UPC: 884548206298
    Condition: New
    Weight: 12.60 LBS
    Item Package Quantity: 1
    $284.99
    Adding to cart… The item has been added

    Have questions?

    CARDONE New CV Axle Assembly P/N:66-9324
    CARDONE New CV Axle Assembly P/N:66-9324
    $284.99
    $284.99

    A1 CARDONE 66-9324 front left CV axle for the 2007-2013 Mini Cooper carries drive torque from the transaxle to the front left wheel. This A1 CARDONE CV drive axle is engineered around the reasons original axles typically fail.

    • Neoprene boots with extra bellows where needed to resist bellow stress and ozone cracking
    • Each shaft is individually verified for straightness for vibration-free performance at all speeds
    • Boot clamps are pneumatically crimped to seal the boot to the housing
    • Grease withstands high-temperature and high-torque demands
    • Precision-rolled splines and threads for proper fit in the hub, the transmission and the axle nut
    • Transmission seal diameter is precision-machined after heat treatment for correct surface finish

    Quick facts

    • Part: A1 CARDONE 66-9324 CV axle
    • Also called: CV axle assembly
    • Fits: 2007-2013 Mini Cooper
    • Position: Front left
    • Material: Steel shaft, neoprene boots
    • Condition: New

    Clicking or snapping when you turn with the wheel cut, a thump under throttle, or grease on the chassis can mean a CV axle assembly is worn or its boot has split. Before you replace it, rule out a broken engine mount, which can let the drivetrain shift and bind the joint, and a damaged ABS sensor ring or wiring if the ABS light is on. This listing is one axle, and both front sides are normally replaced together.

    Fits

    This axle fits the 2007-2013 Mini Cooper and is built to meet O.E. form, fit and function.

    Specifications

    Fit and size

    • Position: Front left
    • Quantity per vehicle: 1 for this side
    • Shaft diameter: 28.07 mm (1.105 in)
    • Compressed length: 620 mm (24.409 in)
    • Inboard joint: splined, 33 splines
    • Outboard joint: splined, 26 splines
    • Axle nut thread: M22x1.5
    • Axle nut socket size: 31.5 mm (1.24 in)
    • Axle nut length: 20 mm (0.787 in)

    Build and materials

    • Construction: complete axle with CV joints, hex axle nut included
    • Shaft material: Steel
    • Boot material: Neoprene, 4 ribs
    • ABS tone ring: not included
    • Condition: New
    • Country of origin: China

    In the box

    One complete CV axle with its CV joints, a new axle retaining nut and an instruction sheet; the ABS tone ring is not included. The front left takes one axle, and the front right is a separate part.

    Installation notes

    • Discard the old locking nut and install the new retaining nut supplied with the axle.
    • Tighten the nut with a torque wrench to the manufacturer's specification, never with an impact wrench.
    • Never let the axle hang unsupported, which can separate it and damage the inner joint.
    • Use a press-type tool to remove a stuck stub shaft and never strike it with a hammer.

    Interchange: 31602756341 · 31604853485 · 31607589767

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    31602756341, 31604853485, 31607589767

    Frequently Asked Questions

    Will the A1 CARDONE 66-9324 work as a CV axle for the 2007-2013 Mini Cooper?

    Yes. A1 CARDONE 66-9324 is a front left axle that fits the 2007-2013 Mini Cooper. The front right side takes a separate axle.

    Do A1 CARDONE axles come with a new axle nut?

    Yes. A1 CARDONE 66-9324 includes a new hex axle retaining nut (M22x1.5) and an instruction sheet, since the original nut is likely worn or stripped; the ABS tone ring is not included.

    What are the shaft and axle nut sizes on this CV axle?

    The shaft diameter is 28.07 mm (1.105 in), and the axle nut is M22x1.5 with a 31.5 mm socket. Compressed length is 620 mm (24.409 in).

    Why would the ABS light come on after installing a new CV axle?

    If the sensor ring, sensor or its wiring near the axle was damaged during installation, it can send an erratic speed signal to the ABS module and turn the light on. A shop can test the sensor circuit.

    Should I install new transaxle seals with a replacement CV axle?

    Yes. Always fit new transaxle seals when replacing a CV axle so the transaxle does not leak.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review