CARDONE New Power Steering Pump P/N:96-286
A1 CARDONE 96-8752 power steering pump for the 1996-2000 Dodge Grand Caravan and other vehicles generates hydraulic pressure for power steering assist. This new A1 CARDONE power steering pump is designed to fit and perform like the original.
A whine from the pump, heavy steering or assist that only comes with higher engine rpm can mean the pump is wearing out. A leaking hose or a loose belt can produce similar symptoms, so with the engine off, look over the hoses, fittings and belt for leaks, cracks or looseness before you replace the pump.
It is listed for a wide range of Chrysler, Dodge and Plymouth models, as a direct-fit power steering pump for the 1996-2000 Chrysler Town & Country and a power steering pump replacement for the 1996-2000 Dodge Caravan. A 1996-2000 Dodge Grand Caravan takes one pump. If your vehicle is not one of these, open the "Vehicles it fits" section to check your exact model and engine.
Fit and size
Build and materials
One power steering pump, a sealing kit and an instruction sheet. Mounting hardware, reservoir cap and filter are not included, so plan on new bolts, since the old fasteners may not be reusable.
Interchange: 4684140 · 4684156 · 4684158AB · 4684158
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Will this Dodge Caravan power steering pump fit a 1996-2000 model?
Yes. A1 CARDONE 96-8752 is listed for the 1996-2000 Dodge Caravan, and that van takes one pump. Use the "Vehicles it fits" section for other models and engines.
Does this power steering pump come with a pulley or mounting hardware?
No. The A1 CARDONE 96-8752 package holds the pump, a sealing kit and an instruction sheet. The pulley, mounting hardware, reservoir cap and filter are not included.
What size is the outlet thread on this power steering pump?
The outlet is threaded at 16x1.5 and the hose ports are O-ring type. The inlet is a barb with a 0.423 in diameter.
Why is steering still hard in one direction after replacing the pump?
The pump does not know left from right, so binding steering components elsewhere in the system can be the cause and need repair. A shop can diagnose it.
My old pulley is loose on the new pump shaft. What should I do?
If the pulley cracked on removal, or a mushroomed shaft enlarged its bore, the pulley must be replaced. This pump has a press-on shaft and no pulley included.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.