Clamp the brake pads firmly against the rotor with the A1 CARDONE Remanufactured Unloaded Disc Brake Caliper 19-1904 — a 1995-1998 Nissan 240SX rear caliper for the left side that installs as a direct-fit replacement. Hydraulic pressure from the brake line drives the caliper piston, pressing the pads against the rotor; as an "unloaded" unit it ships without brake pads. Every CARDONE caliper is 100% pressure-tested and expertly remanufactured with brand-new premium components.
- New pistons: durable and resistant to cracking or pitting to handle high clamping loads.
- New EPDM seals: the rubber seals are replaced with new high-temperature EPDM rubber for extended life and consistent performance.
- Complete hardware: arrives with a set of brand-new hardware — new bleeder screws for trouble-free bleeding, plus new banjo bolts, washers, stainless steel clips, mounting pins and a caliper bracket included where applicable.
- Corrosion protection: treated with a specially formulated rust inhibitor and kept in the original equipment finish.
A plastic cap plug protects the brake port threads during handling and installation. If a seized, leaking or sticking caliper is the cause of braking trouble on your 1995-1998 Nissan 240SX, this A1 CARDONE caliper replaces it. This listing is for one rear left caliper; calipers work per wheel, so replacing both rear calipers together is recommended to help keep braking balanced side to side.
Interchange: 4401169F01
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
Does this A1 CARDONE caliper fit my 1995-1998 Nissan 240SX?
Yes — the 19-1904 is a direct-fit replacement for the rear left position on the 1995-1998 Nissan 240SX. Confirm your vehicle in the "Vehicles it fits" section before ordering.
Does this caliper come with brake pads?
No. It is an unloaded caliper, so it ships without brake pads. It does include a set of brand-new hardware, with the caliper bracket and mounting pins included where applicable.
Is the caliper new or remanufactured?
It is expertly remanufactured to CARDONE's quality standards with brand-new premium components, and each unit is 100% pressure-tested.
What hardware is included?
New bleeder screws, plus new banjo bolts, washers, stainless steel hardware clips, mounting pins and a caliper mounting bracket are included where applicable.
Should I replace both rear calipers at once?
This listing is for one rear left caliper. Replacing both rear calipers as a pair is recommended to help keep braking even side to side. Diagnose the fault before replacing.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review