A1 CARDONE 19-B3470 front right brake caliper for the 2009-2010 BMW 528i xDrive and other vehicles presses the brake pads against the rotor to slow the wheel. This remanufactured A1 CARDONE brake caliper is a floating, single-piston design.
- 100% pressure-tested after remanufacturing
- Brand-new components, with new hardware
- Steel piston that resists cracking and pitting
- New high-temperature EPDM rubber seals
- Special rust inhibitor treatment on the caliper
- New bleeder screw for trouble-free bleeding and a positive seal
Quick facts
- Part: A1 CARDONE 19-B3470 brake caliper
- Also called: disc brake caliper
- Fits: 2009-2010 BMW 528i xDrive and other vehicles
- Position: Front right
- Material: Aluminum casting, steel piston
- Condition: Remanufactured
Signs a disc brake caliper is worn or sticking can include the car pulling to one side when braking, a soft pedal or uneven pad wear. Before you replace it, rule out sticking slide pins, a collapsed brake hose and air in the system, since each of those can feel like a failing caliper; a shop can test the hydraulics.
Fits
Fitment also covers the 2009-2010 BMW 535i xDrive and the 2008 BMW 528xi. Open the "Vehicles it fits" section to match your exact model and engine. The front axle takes one caliper on each side; this listing is the front right, the front left is its own part, and both sides are normally replaced together.
Specifications
Fit and size
- Position: Front right
- Quantity per vehicle: 1 for this side
- Piston diameter: 59.8678 mm (2.357 in)
- Mounting hole diameter: 11.98408 mm (0.472 in)
- Mounting hole thread: M12x1.5
- Inlet port size: 10.00366 mm (0.394 in), inverted flare, M10x1.0 thread
- Bleeder thread size: M10x1.0
Build and materials
- Caliper type: Floating, one piston
- Condition: Remanufactured
- Casting material: Aluminum
- Piston material: Steel
- Finish: Oil emulsion, with a rust-resistant coating
- Casting numbers: 60/30/X, ATE 522
- Country of origin: Mexico
In the box
One caliper with its bracket, a hardware kit and an instruction sheet. Brake pads, mounting bolts, abutment clips, a pad wear sensor and a bleeder screw cap are not included, so plan on new mounting bolts.
Installation notes
- A plastic cap plug covers each brake port thread.
- New banjo bolts and washers are included where applicable.
- The instruction sheet in the box covers the steps.
Interchange: 34116766558
Frequently Asked Questions
Is the A1 CARDONE 19-B3470 front right caliper right for a 2009-2010 BMW 535i xDrive?
Yes. A1 CARDONE 19-B3470 is a front right brake caliper for the 2009-2010 BMW 535i xDrive. The front left caliper is a separate part.
Does this A1 CARDONE caliper come with a bracket and hardware?
Yes. The A1 CARDONE 19-B3470 box holds the caliper, bracket, hardware kit and instruction sheet. Brake pads, mounting bolts, abutment clips and a pad wear sensor are not included.
What size is the piston on this front right caliper?
The piston is steel and measures 59.8678 mm (2.357 in) across. The caliper is a floating design with one piston.
How can I tell if a front right caliper is sticking?
Pulling to one side when braking or uneven pad wear can be signs of a sticking caliper. A shop can test it; have a sticking brake looked at promptly.
Does the A1 CARDONE 19-B3470 include a bleeder screw?
Yes. It includes one new bleeder screw, and a plastic cap plug covers each brake port thread. The bleeder screw cap is not included.
