A1 CARDONE 67-6010 fuel injection throttle body for the 2007-2010 Ford F-150 V8 4.6L and other vehicles meters the air that enters the engine. This remanufactured electric unit has an integrated throttle position sensor.
- Each unit is disassembled and inspected, and each component is renewed or replaced as needed
- Specialized cleaning process keeps the throttle bore surface from deforming
- High and low integrated throttle position sensors tested throughout the entire operational range
- Final assembly tested for response time and air flow at multiple points
Quick facts
- Part: A1 CARDONE 67-6010 fuel injection throttle body
- Fits: 2007-2010 Ford F-150 V8 4.6L and other vehicles
- Condition: Remanufactured
A rough idle, hesitation when you press the pedal or a warning light can be signs of a throttle body problem. Before you replace the throttle body, rule out a vacuum leak, a wiring fault or a dirty throttle bore, which can produce a similar idle or hesitation. A shop can scan and test it for you.
Fits
This throttle body is listed for a wide range of Ford, Lincoln and Mercury models, led by the 2007-2010 Ford F-150 V8 4.6L, the 2010-2012 Ford Fusion V6 3.5L and the 2007-2008 Ford F-250 V8 4.6L. The 2010-2012 Ford Fusion V6 3.5L takes one, and this listing is one throttle body. If your car is not named here, look it up in the "Vehicles it fits" section further down the page.
Specifications
Fit and size
- Quantity per vehicle: 1
- Inlet diameter: 80 mm (3.153 in)
- Bore diameter: 65 mm (2.562 in)
- Outlet diameter: 71 mm (2.799 in)
- Inlet and outlet shape: circle
- Connector: rectangular, blade terminals
Build and materials
- Type: electric throttle body
- Throttle position sensor: included
- Condition: Remanufactured
- Country of origin: Mexico
In the box
One fuel injection throttle body and one instruction sheet. Mounting hardware, gaskets or seals, fuel injectors, an idle air control motor and a throttle body spacer are not included, so plan on new mounting hardware.
Interchange: 7T4Z9E926FA
Frequently Asked Questions
Is this A1 CARDONE 67-6010 throttle body right for a 2010-2012 Ford Fusion V6 3.5L?
Yes, the A1 CARDONE 67-6010 is listed for the 2010-2012 Ford Fusion V6 3.5L, which takes one; other cars are in the "Vehicles it fits" section.
Does this remanufactured throttle body come with its throttle position sensor?
Yes, the throttle position sensor is included, along with an instruction sheet. Mounting hardware, gaskets or seals, fuel injectors and an idle air control motor are not included.
What are the inlet and bore sizes on this electric throttle body?
The inlet is 80 mm (3.153 in), the bore is 65 mm (2.562 in) and the outlet is 71 mm (2.799 in); the inlet and outlet are both circular.
How do I tell if my electric throttle body is going bad?
An unsteady idle, hesitation when you press the pedal or a warning light can be signs. Each can have other causes, so a shop scan can narrow it down.
How is the CARDONE 67-6010 remanufactured throttle body tested?
The final assembly of the A1 CARDONE 67-6010 is tested for response time and air flow at multiple points, and its high and low integrated throttle position sensors are tested across the entire operational range.
