A1 CARDONE 67-6015 fuel injection throttle body for the 2009-2012 Ford Escape V6 3.0L, the 2009-2025 Escape 4-cylinder 2.5L and other vehicles is a remanufactured unit that controls how much air enters the engine. Its integrated high and low throttle position sensors are tested to match O.E. characteristics across their entire operational range.
- Each unit is disassembled and inspected, and every component is remanufactured or replaced
- A specialized cleaning process keeps the throttle bore surface from being deformed
- Final assemblies are tested for response time and air flow at multiple points
- Throttle position sensor included
- Remanufacturing reduces the energy and raw material needed for a new part by 80%
Quick facts
- Part: A1 CARDONE 67-6015 fuel injection throttle body
- Fits: the 2009-2012 Ford Escape V6 3.0L, the 2009-2025 Escape 4-cylinder 2.5L and other vehicles
- Condition: Remanufactured
A rough or unstable idle, slow response when you press the pedal or a check engine light can be signs of a worn throttle body. Before you replace it, rule out other causes of those signs, such as an intake vacuum leak or a sensor fault.
Fits
The 2010-2012 Ford Fusion V6 3.0L, the 2010-2020 Fusion 4-cylinder 2.5L, the 2013-2020 Fusion 4-cylinder 2.0L and the 2022-2025 Ford Maverick 4-cylinder 2.5L all fit this throttle body, as do many other Ford, Lincoln and Mercury models. The 2022-2025 Ford Maverick 4-cylinder 2.5L takes one. Open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Quantity per vehicle: 1
- Inlet diameter: 71 mm (2.799 in)
- Bore diameter: 60 mm (2.365 in)
- Outlet diameter: 62 mm (2.444 in)
- Connector shape: Rectangular, blade terminals
Build and materials
- Throttle body type: Electric
- Condition: Remanufactured
- Throttle position sensor: included
- Country of origin: Mexico
In the box
One fuel injection throttle body and one instruction sheet. Mounting hardware, a gasket or seal, a throttle body spacer, fuel injectors and an idle air control motor are not included, so plan on new hardware and a new gasket rather than reusing the old ones.
Interchange: DS7Z9E926D
Frequently Asked Questions
Does the A1 CARDONE 67-6015 fit the 2009-2012 Ford Escape V6 3.0L?
Yes, A1 CARDONE 67-6015 fits the 2009-2012 Ford Escape V6 3.0L and the 2009-2025 Escape 4-cylinder 2.5L. Open the "Vehicles it fits" section to check other models and engines.
Does the A1 CARDONE 67-6015 come with a gasket or mounting hardware?
No. Besides the throttle body, A1 CARDONE 67-6015 comes with an instruction sheet, and mounting hardware, a gasket or seal, fuel injectors and an idle air control motor are not included.
What are the inlet, bore and outlet sizes of this throttle body?
The bore diameter is 60 mm (2.365 in). The inlet is 71 mm (2.799 in) and the outlet is 62 mm (2.444 in).
What are the signs of a failing throttle body?
A rough idle, hesitation when you press the pedal or a check engine light can be signs of a failing throttle body. A shop can scan and test it to confirm.
Does this throttle body include the throttle position sensor?
Yes, the integrated high and low throttle position sensors come built into the unit. They are tested to match O.E. characteristics throughout their entire operational range.
