A1 CARDONE 26-2039 rack and pinion for the 2004-2011 Chevrolet Aveo and other vehicles turns steering wheel rotation into side-to-side wheel movement. This remanufactured unit, also called a rack and pinion assembly, is re-engineered, built and tested for fit and function.
- Protective coating on each unit to extend its life, where applicable
- 100% performance testing, plus 100% hydraulic testing for flow and leakage, where applicable
- Racks surfaced to precise specifications to prevent leaking between chambers
- New o-rings and lip seals for leak-free sealing, where applicable
- New spool valve seals and rack donut seals to eliminate internal leaks, where applicable
- Valve housings with polished micro-finish sleeves for durability, where applicable
Quick facts
- Part: A1 CARDONE 26-2039 rack and pinion
- Also called: rack and pinion assembly
- Fits: 2004-2011 Chevrolet Aveo and other vehicles
- Condition: Remanufactured
Loose steering, a wheel that does not return to center after a turn, or fluid seepage around the rack can mean the rack is worn or leaking. Before replacing it, look the rack and its bellows over for wetness with the engine off and cool, and rule out the pump, hoses and tie rods.
Fits
The 2004-2011 Chevrolet Aveo, the 2006-2011 Chevrolet AVEO5 and the 2007-2010 Pontiac G3 are among the vehicles this rack and pinion fits, with one rack per car.
Specifications
Fit and size
- Quantity per vehicle: 1
- Steering input shaft: grooved, 36 splines, 15.69 mm (0.618 in) diameter
- Inlet line fitting: male, 17.83 mm (0.702 in) diameter
- Outlet line fitting: male, 11.66 mm (0.459 in) diameter
- Total turns lock to lock: 3
- Mounting hole quantity: 1
Build and materials
- Condition: Remanufactured
- Seals: sealing kit included
- Inner tie rods: included
- Country of origin: Mexico
In the box
One rack and pinion, one sealing kit, one instruction sheet and the inner tie rods. Outer tie rods, mounting hardware and mounting brackets are not included, so plan on new hardware, since the old fasteners may not be reusable.
Installation notes
- The power steering system must be bled after installation, which may take a few attempts depending on the system's design.
- The instruction sheet in the box covers the installation steps.
Interchange: 96425093 · 96535298 · 96806653 · 96897655
This part cross-references / interchanges with the following part numbers:
96425093, 96535298, 96806653, 96897655
Frequently Asked Questions
Is the A1 CARDONE 26-2039 rack and pinion right for the 2006-2011 Chevrolet AVEO5?
Yes, A1 CARDONE 26-2039 fits the 2006-2011 Chevrolet AVEO5, and that car takes one. It fits other vehicles too; find your own car in the "Vehicles it fits" section.
Are inner tie rods included with the A1 CARDONE 26-2039?
Yes, A1 CARDONE 26-2039 includes the inner tie rods, a sealing kit and an instruction sheet. Outer tie rods, mounting hardware and mounting brackets are not included.
Does this A1 CARDONE steering rack come with new seals?
Yes. A sealing kit is in the package, and the unit is rebuilt with new o-rings, lip seals, spool valve seals and rack donut seals where they apply.
What size are the power steering line fittings on this rack and pinion?
Both line fittings are male. The inlet is 17.83 mm (0.702 in) across and the outlet is 11.66 mm (0.459 in), and the grooved input shaft has 36 splines.
Why is my power steering pump whining after a rack and pinion swap?
The most likely cause is air in the system. The steering system must be bled, which may take a few attempts depending on its design.
