A1 CARDONE 26-2308 rack and pinion for the 2004-2009 Kia Spectra and other vehicles is a remanufactured unit that turns steering wheel input into wheel movement. The rack and pinion assembly is re-engineered, built and tested for fit and function.
- Protective coating applied to each unit where applicable
- 100% performance testing for fit, function and reliable performance
- 100% hydraulic testing for flow, leakage and performance, where applicable
- Racks surfaced to precise specifications to prevent leaking between chambers
- New o-rings and lip seals, plus new spool valve seals and rack donut seals, installed where applicable
- Valve housings with polished micro-finish sleeves for durability, where applicable
Quick facts
- Part: A1 CARDONE 26-2308 rack and pinion
- Also called: rack and pinion assembly
- Fits: 2004-2009 Kia Spectra and other vehicles
- Condition: Remanufactured
Play in the steering wheel, a wheel that does not return to center after a turn, or fluid leaking at the rack can all mean the rack is worn. Before you replace the rack and pinion, rule out other sources of the same signs, such as a leaking line fitting or worn tie rods.
Fits
This rack and pinion fits the 2004-2009 Kia Spectra and the 2006-2009 Kia Spectra5.
Specifications
Fit and size
- Quantity per vehicle: 1
- Mounting hole quantity: 2
- Steering input shaft diameter: 16.58 mm (0.653 in)
- Steering input shaft splines: 36
- Inlet line fitting diameter: 13.87 mm (0.546 in), male
- Outlet line fitting diameter: 11.66 mm (0.459 in), male
- Total turns lock to lock: 2.875
Build and materials
- Condition: Remanufactured
- Input shaft type: Grooved
- Inner tie rods: included
- Sealing kit: included
- Country of origin: Mexico
In the box
One rack and pinion with its inner tie rods, a sealing kit and an instruction sheet. This listing holds one unit, and the 2004-2009 Kia Spectra and 2006-2009 Kia Spectra5 each take one. Mounting hardware, mounting brackets and outer tie rods are not included; plan on new fasteners, since the old ones may not be reusable.
Installation notes
- The instruction sheet in the box covers the installation steps.
- The power steering system must be bled after installation, which may take a few attempts depending on the system's design.
Interchange: 577002F100 · 577002F101 · 577242D000
This part cross-references / interchanges with the following part numbers:
577002F100, 577002F101, 577242D000
Frequently Asked Questions
Is this a rack and pinion for the 2004-2009 Kia Spectra?
Yes. A1 CARDONE 26-2308 is a remanufactured rack and pinion for the 2004-2009 Kia Spectra, and the car takes one.
Does the A1 CARDONE rack and pinion come with tie rods?
Yes, it includes the inner tie rods, a sealing kit and an instruction sheet. Outer tie rods, mounting hardware and mounting brackets are not included.
What size is the input shaft on this rack and pinion?
The A1 CARDONE 26-2308 has a grooved input shaft with 36 splines, 16.58 mm (0.653 in) in diameter. Its inlet fitting is male at 13.87 mm and its outlet fitting is male at 11.66 mm.
Why is my power steering pump whining after a rack and pinion replacement?
Air in the system can cause that whine. The steering system must be bled, and this may take a few attempts depending on the system's design.
Is the A1 CARDONE steering rack new or remanufactured?
It is remanufactured. Racks are surfaced to precise specifications, and each unit gets 100% performance testing, with hydraulic testing for flow and leakage where applicable.
