A1 CARDONE 26-2450 rack and pinion for the 2011-2013 Kia Sorento and other vehicles turns steering wheel rotation into side-to-side movement at the wheels. This remanufactured unit, also called a rack and pinion assembly, is tested to meet or exceed O.E. fit and performance.
- New o-rings and lip seals installed to prevent leaks, where applicable
- Protective coating applied to each unit, where applicable
- 100% performance testing, plus 100% hydraulic testing for flow and leakage, where applicable
- Racks surfaced to precise specifications to prevent leaking between chambers
- New spool valve seals and rack donut seals to eliminate internal leaks, where applicable
- Valve housings with polished micro-finish sleeves, where applicable
Quick facts
- Part: A1 CARDONE 26-2450 rack and pinion
- Also called: rack and pinion assembly
- Fits: 2011-2013 Kia Sorento and other vehicles
- Condition: Remanufactured
A power steering fluid leak, a steering wheel that does not return to center after a turn, or play in the steering can mean the rack is worn. A worn tie rod end, a failing power steering pump or low fluid can be behind the same signs, so find the cause before buying a replacement.
Fits
It fits the 2011-2013 Kia Sorento and the 2010-2012 Hyundai Santa Fe, and each vehicle takes one.
Specifications
Fit and size
- Quantity per vehicle: 1
- Steering input shaft diameter: 0.748 in (18.99 mm)
- Input shaft: grooved, 36 splines
- Inlet line fitting: 0.459 in (11.66 mm) diameter, male
- Outlet line fitting: 0.459 in (11.66 mm) diameter, male
- Mounting holes: 2
- Total turns lock to lock: 3
Build and materials
- Condition: Remanufactured
- Inner tie rods: included
- Seals: sealing kit included
- Country of origin: Mexico
In the box
One rack and pinion with inner tie rods, a sealing kit and an instruction sheet. Outer tie rods, mounting brackets and mounting hardware are not included, so plan on new mounting bolts rather than reusing the old ones.
Installation notes
- The power steering system must be bled after installation, and it can take a few attempts depending on the system's design.
- An instruction sheet comes with the part for the steps.
Interchange: 577000W100
Frequently Asked Questions
Is this a 2011 Kia Sorento rack and pinion replacement for the 2011-2013 model years?
Yes. A1 CARDONE 26-2450 fits the 2011-2013 Kia Sorento, and it also fits the 2010-2012 Hyundai Santa Fe.
Does the A1 CARDONE 26-2450 include tie rods and a sealing kit?
It includes the inner tie rods, a sealing kit and an instruction sheet. Outer tie rods, mounting brackets and mounting hardware are not included.
What size is the input shaft on this rack and pinion?
The grooved input shaft has 36 splines and measures 0.748 in (18.99 mm) in diameter. The inlet and outlet line fittings are male, 0.459 in (11.66 mm) in diameter.
Is the A1 CARDONE steering rack remanufactured or new?
Remanufactured. A1 CARDONE 26-2450 gets new o-rings and lip seals where applicable, plus a final protective coating on each unit.
Why is the power steering pump whining after I installed this rack and pinion?
Air in the system is the most likely cause of a pump whine after a rack is replaced. The steering system must be bled, and it can take a few attempts.
