Carlson Brake Hydraulic Banjo Bolt P/N:H9459-2

Be the first to review this product
$24.99
MPN: H9459-2
Item Package Quantity: 1
Adding to cart… The item has been added

Have questions?

Carlson Brake Hydraulic Banjo Bolt P/N:H9459-2
Carlson Brake Hydraulic Banjo Bolt P/N:H9459-2
$24.99

Seal the front brake hose connection and keep pressurized fluid where it belongs with the Carlson Brake Hydraulic Banjo Bolt H9459-2. This hollow, cross-drilled through-bolt clamps the banjo brake-hose fitting to the front brake hydraulic component while routing fluid through its internal passages. It installs as a direct-fit replacement across a long list of Chrysler, Dodge, and Plymouth applications, including the 1978-1983 Chrysler Cordoba, 1977-1993 Dodge D150, 1974-1993 Dodge Ramcharger, and 1976-1980 Plymouth Volare — see the Buyer's Guide tab for the complete list of 60 applications.

  • Front brake hydraulic fitting: fastens the banjo hose end at the front brake connection.
  • Hollow, cross-drilled bolt: carries pressurized brake fluid through the bolt while clamping the joint closed.
  • Direct-fit replacement: installs in place of the original banjo bolt on the listed applications.

When the original bolt corrodes, strips, or weeps fluid at its sealing surfaces, replacing it helps restore a tight, leak-free hydraulic connection. If a leak at the banjo joint is the cause of fluid loss or a soft pedal, this bolt replaces the failed hardware — always diagnose the source of a leak first, fit fresh sealing washers as directed by the service procedure, and bleed the brakes after installation.

Interchange: B7003 · FHH9459-2 · FHH94592 · 82701 · H5373 · H5373-2 · H53732 · 301H5373 · H9459 · Manufacturer part number H9459-2

This part cross-references / interchanges with the following part numbers:

H9459-2, B7003, FHH9459-2, 82701, H5373, H5373-2, 301H5373, H9459

Frequently Asked Questions

What is a brake hydraulic banjo bolt?

It's a hollow through-bolt with internal passages that fastens the banjo brake-hose fitting to the front brake component, letting pressurized fluid flow through it while clamping the joint sealed.

Which vehicles does the H9459-2 fit?

It's a direct-fit front-brake replacement for 60 Chrysler, Dodge, and Plymouth applications, such as the 1978-1983 Chrysler Cordoba and 1977-1993 Dodge D150. See the Buyer's Guide tab for the full list.

Is this a front or rear part?

The catalog lists it as a front brake hydraulic banjo bolt.

What part numbers does it replace?

It interchanges with B7003, FHH9459-2, 82701, H5373, H5373-2, 301H5373, and H9459.

What should I do when installing it?

If a leak at the banjo joint is causing fluid loss or a soft pedal, replacing this bolt addresses it. Fit fresh sealing washers as directed by the service procedure and bleed the brakes afterward.