Centric Parts Brake Hydraulic Hose P/N:150.65129
Keep pressurized brake fluid moving from the chassis to the front wheels with the Centric Parts brake hydraulic hose, part number 150.40089, a direct-fit replacement for the listed applications on the 2003-2008 Honda Pilot, 1999-2004 Honda Odyssey and 2001-2006 Acura MDX. This flexible front hose connects the vehicle's rigid brake line to the brake at the wheel. It carries fluid under pressure while the suspension travels and the steering turns.
Signs a brake hose may need replacing include visible cracking, bulging or swelling, fluid seeping at the hose or its fittings, a soft or spongy pedal, and a vehicle that pulls to one side when braking. Other parts can cause these symptoms, so inspect the whole brake system before you replace anything. If a worn hose is the cause, this Centric hose replaces it. Replacing both front hoses at the same time is a common recommendation. Consult the vehicle service information for the correct fasteners and sealing washers, and bleed the brake system after installation. See the "Vehicles it fits" section for engine details and the full fitment list.
Interchange: B917897 · 78821 · 512271 · H381261 · H620391 · H621101 · E15545094 · 381261 · 01464S0X000 · 01464S3VA10 · 01464S9VA00 · 46410S0XA01 · 46410S0XA010 · BH381261 · BH382907 · 224009 · BH140207 · BH144145 · F140207
This part cross-references / interchanges with the following part numbers:
What does this brake hose do?
It is a flexible line that carries pressurized brake fluid from the vehicle's rigid brake line to the brake at the front wheel. It flexes as the suspension moves and the steering turns.
Which vehicles does Centric 150.40089 fit?
It is a direct-fit front hose for the listed applications on the 2003-2008 Honda Pilot, 1999-2004 Honda Odyssey and 2001-2006 Acura MDX. Check the "Vehicles it fits" section to confirm your exact vehicle.
What are the signs of a failing brake hose?
Common signs are cracks, bulging, fluid leaks at the hose or fittings, a soft or spongy pedal, and pulling when braking. Other parts can cause these symptoms, so diagnose the brake system before replacing anything.
Do I need to bleed the brakes after installing it?
Yes. Opening the hydraulic system lets air in, so bleed the brakes after installation. Follow the vehicle service information for fasteners, sealing washers and torque values.
Should I replace both front brake hoses at once?
Replacing both front hoses together is commonly recommended so both sides are in similar condition. It is also a good time to inspect the rest of the brake lines and hoses.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.