Centric Parts Brake Hydraulic Hose P/N:150.44069
Keep firm, responsive braking flowing to the front right corner with the Centric Parts Brake Hydraulic Hose 150.44069. This flexible hose carries pressurized brake fluid from the chassis hard line to the caliper while flexing with suspension and steering movement. It drops in as a direct-fit replacement for the front right position on the 1997-2001 Lexus ES300, 1997-2004 Toyota Avalon, and 1997-2001 Toyota Camry (All engines), plus the 1999-2003 Lexus RX300 and 1999-2003 Toyota Solara.
- Construction: black EPDM rubber outer sleeve; not Teflon-lined.
- End fittings: a metal banjo fitting on one end and a metal inverted-flare fitting on the other.
- Included: one steel bracket, one retaining clip, and a gasket/seal. Mounting hardware is not included.
- Specs: DOT approved; overall length 20.512 in (521 mm).
Centric references compatible banjo bolts 117.99014 and 117.99023 and washer 117.99008 for this application. Country of origin: China. Signs the hose may need replacing include cracking, bulging, or fluid seepage at the fittings, or a soft/spongy pedal — diagnose the cause before replacing. Manufacturer part number 150.44069.
Frequently Asked Questions
What does this brake hose do?
It carries pressurized brake fluid from the chassis hard line to the caliper while flexing with suspension and steering movement to keep the hydraulic circuit connected.
Which vehicles and position does it fit?
It's cataloged for the front right position on the 1997-2001 Lexus ES300, 1999-2003 Lexus RX300, 1997-2004 Toyota Avalon, 1997-2001 Toyota Camry, and 1999-2003 Toyota Solara. See the Buyer's Guide tab to confirm your vehicle.
Is this hose DOT approved?
Yes. The catalog lists it as DOT approved, with a black EPDM rubber outer sleeve and an overall length of 20.512 in (521 mm).
What comes in the box?
It includes one steel bracket, one retaining clip, and a gasket/seal. Mounting hardware is not included, so consult the vehicle service information for the correct fasteners and whether they may be reused.
What are the end fittings?
One end uses a metal banjo fitting and the other uses a metal inverted-flare fitting. Centric references banjo bolts 117.99014 and 117.99023 and washer 117.99008 for this application.
Write a Review