Keep brake fluid flowing to the front left wheel with the Centric Parts brake hydraulic hose, part number 150.58024. It is a direct-fit replacement for the listed applications on the 2007-2011 Jeep Wrangler and is cataloged for the front left position. See the "Vehicles it fits" section for engine details.
A brake hydraulic hose is the flexible link in the brake circuit. It carries pressurized brake fluid from the rigid brake line to the brake at the wheel, and it flexes as the suspension travels and the wheels steer.
- Position: front left.
- Application coverage: Centric describes its brake hose line as having the widest application coverage in the aftermarket.
- Quality: Centric presents the hose as one of the highest-quality aftermarket replacements.
- Part of a full hydraulic program: Centric's brake hydraulic lineup also covers brake master cylinders, wheel cylinders, caliper and wheel cylinder repair kits and power boosters, so you can source related components from one brand.
A brake hose may need replacing if you notice a soft or spongy pedal, brake fluid seeping at the hose or its fittings, visible cracking or bulging, or the vehicle pulling to one side under braking. Other brake faults can cause the same symptoms, so diagnose the system before you replace parts. After installation, bleed the brakes. Check the vehicle service information for the correct fittings, sealing hardware and torque values.
Interchange: H620926 · H622075 · E15563029 · 52060045AD · 52060045AE · 52060045AF · 52060045AG · 52060045AH · BH382902 · BH382921 · 2202603 · 221927 · 222603
This part cross-references / interchanges with the following part numbers:
150.58024, H620926, H622075, E15563029, 52060045AD, 52060045AE, 52060045AF, 52060045AG, 52060045AH, BH382902, BH382921, 2202603, 221927, 222603
Frequently Asked Questions
What does the Centric Parts 150.58024 brake hydraulic hose do?
It carries pressurized brake fluid from the rigid brake line to the brake at the front left wheel, and it flexes as the suspension moves and the wheels steer.
Does this brake hose fit the 2007-2011 Jeep Wrangler?
Yes. It is a direct-fit replacement for the 2007-2011 Jeep Wrangler in the front left position. See the "Vehicles it fits" section for engine details.
Which position does this hose install in?
It is cataloged for the front left position.
What are signs a brake hose may need replacing?
Look for a soft or spongy pedal, fluid seeping at the hose or fittings, cracking or bulging, or pulling to one side when braking. Other faults can cause these symptoms, so diagnose the system first.
Do I need to bleed the brakes after installing it?
Yes. Opening the hydraulic system lets air in, so bleed the brakes per the vehicle service procedure. Use the fittings, sealing hardware and torque values it specifies.
