Deliver brake fluid to the front right brake with the Centric Parts brake hydraulic hose, part number 150.62147. It is a direct-fit replacement for the 2007 Cadillac CTS and is cataloged for the front right position. See the "Vehicles it fits" section for engine details.
A brake hydraulic hose is the flexible link in the brake system. It carries brake fluid under pressure from the vehicle's rigid brake line to the brake at the wheel, and it flexes to follow suspension and steering movement. Centric describes its brake hoses as some of the highest-quality replacements in the aftermarket, with the widest application coverage available.
Signs a brake hose may need replacing include cracks, bulges or chafing on the hose, brake fluid seeping at the hose ends, or a soft or spongy brake pedal. If a worn hose is the cause, this part replaces it. Diagnose the cause before you replace parts. After installation, bleed the brake system. Consult the vehicle service information for the correct fittings, hardware and torque values, and for whether any of them may be reused.
Interchange: H620426 · 10375428 · 15875853 · 25688043 · 25736889 · 25761441 · BH382463 · BH382629 · 222728 · 224704 · BH141235 · F141235
This part cross-references / interchanges with the following part numbers:
What does the Centric Parts brake hydraulic hose do?
It is a flexible line that carries brake fluid from the rigid brake line to the brake at the wheel. It flexes as the suspension and steering move.
Does part 150.62147 fit the 2007 Cadillac CTS?
Yes. It is cataloged as a direct-fit replacement for the 2007 Cadillac CTS at the front right position. Check the "Vehicles it fits" section for engine details.
Which wheel position is this brake hose for?
It is cataloged for the front right position. Match it to the side you are replacing.
What are signs a brake hose may need replacing?
Cracks, bulges or chafing on the hose, fluid seeping at the hose ends, or a soft or spongy brake pedal can point to a failing hose. Diagnose the cause before replacing parts.
Do I need to bleed the brakes after installing it?
Yes. Opening the hydraulic system lets air in, so bleed the brakes after installation. Follow the vehicle service information for fittings, hardware and torque values.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
