Keep brake fluid moving from the chassis line to the brake at the wheel with the Centric Parts brake hydraulic hose, part number 150.65188, a direct-fit replacement for the front left position on the 2005-2008 Ford F-150 and 2006-2008 Lincoln Mark LT. It is the flexible link in the brake's hydraulic circuit. It is designed to carry pressurized brake fluid while the wheel steers and the suspension travels.
Centric says its brake hose line offers the widest application coverage in the aftermarket, and it describes these hoses as the highest-quality replacements available in the aftermarket.
- Position: Front left, cataloged for the listed Ford and Lincoln applications.
- Coverage: Part of a Centric hose program built around broad application coverage.
- Full hydraulic lineup: Centric calls its brake hydraulic program the most complete and up-to-date in the industry. It covers brake master and wheel cylinders, brake hoses, and caliper and wheel cylinder repair kits.
A brake hose may need replacing if it shows visible cracking, bulging or swelling, or fluid seeping at the fittings, or if the brake pedal feels soft or spongy. Other brake components can cause similar symptoms, so diagnose the cause before replacing the hose. After installation, bleed the brake system to remove air. Consult the vehicle service information for any sealing washers, the fasteners and the torque values. If the front right hose shows similar age or wear, replacing it at the same time is recommended. Engine-level fitment details are in the "Vehicles it fits" section.
Interchange: H620630 · E15570193 · 5L3Z2078AA · 6L3Z2078AL · 6L3Z2078ML · 7L3Z2078L · BH382736 · 224715 · BH141197 · F141197
This part cross-references / interchanges with the following part numbers:
150.65188, H620630, E15570193, 5L3Z2078AA, 6L3Z2078AL, 6L3Z2078ML, 7L3Z2078L, BH382736, 224715, BH141197, F141197
Frequently Asked Questions
Which vehicles does the Centric Parts brake hydraulic hose 150.65188 fit?
It is cataloged for the front left position on the 2005-2008 Ford F-150 and 2006-2008 Lincoln Mark LT. Engine-level details are in the "Vehicles it fits" section.
What does a brake hydraulic hose do?
It is the flexible section of the brake circuit. It carries pressurized brake fluid to the brake at the wheel and flexes as the wheel steers and the suspension moves.
Do I need to bleed the brakes after installing this hose?
Yes. Opening the hydraulic circuit lets air in, so bleed the brake system after installation. Consult the vehicle service information for any sealing washers, the fasteners and the torque values.
What are signs a brake hose may need replacing?
Signs include cracking, bulging or swelling, fluid seeping at the fittings, or a soft or spongy pedal. Other brake parts can cause similar symptoms, so diagnose the cause first.
Should I replace both front brake hoses at the same time?
This listing is for the front left hose. If the front right hose shows similar age or wear, replacing both together is recommended.
