Route brake fluid to the rear right brake with the Centric Parts brake hydraulic hose, part number 150.65465. It is a direct-fit replacement for the 2008-2014 Ford E-150, the 2008-2014 Ford E-250, and the 2008-2019 and 2021-2023 Ford E-350 Super Duty. Engine-level details for each application are in the "Vehicles it fits" section.
A brake hydraulic hose is the flexible link in the brake system. It carries pressurized brake fluid from the rigid brake lines to components that move with the suspension, and it flexes as the axle travels. This hose is cataloged for the rear right position, listed as rear right lower, on the listed applications.
Signs this hose may need replacing: a soft or spongy brake pedal, brake fluid seeping at the hose or its fittings, or visible cracking, swelling or chafing on the hose. Other hydraulic parts can cause similar symptoms, so diagnose the cause before replacing. After installation, bleed the brake system. Consult the vehicle service information for the correct fasteners and whether they may be reused.
Interchange: H620997 · E15570470 · 8C2Z2A442A · 8C2Z2A442CR · 8C2Z2A442DR · CC2Z2A442A · CC2Z2A442B · BH382708 · 2202914 · 222914 · BH144049
This part cross-references / interchanges with the following part numbers:
What does the Centric Parts brake hydraulic hose 150.65465 do?
It carries pressurized brake fluid from the rigid brake lines to components that move with the suspension, and it flexes as the axle travels. It is cataloged for the rear right position.
Which Ford models does this brake hose fit?
It fits the 2008-2014 Ford E-150, the 2008-2014 Ford E-250, and the 2008-2019 and 2021-2023 Ford E-350 Super Duty. Engine details are in the "Vehicles it fits" section.
What position is this brake hose for?
Centric catalogs it for the rear right position, listed as rear right lower, on the listed applications.
What are signs a brake hydraulic hose may need replacing?
Possible signs include a soft or spongy pedal, fluid seeping at the hose or fittings, and cracks, bulges or chafing on the hose. Other hydraulic faults can cause similar symptoms, so diagnose first.
What should I do after installing a brake hose?
Bleed the brake system to remove air, then check for leaks and a firm pedal before driving. Consult the vehicle service information for the correct fasteners and whether they can be reused.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
