Centric Parts Brake Hydraulic Hose P/N:150.65129
Keep your front brakes supplied with fluid through every bump and turn with the Centric Parts brake hydraulic hose, part number 150.66055. It is a flexible line that links the vehicle's rigid brake plumbing to the front brake while the suspension moves and the wheels steer. It is a direct-fit replacement for many vehicles, among them the 1991-1999 Chevrolet S10, 1991-1999 GMC Sonoma and 1995-1997 Chevrolet Blazer. See the "Vehicles it fits" section for the full list.
Centric presents its brake hoses as top-quality aftermarket replacements, backed by what it calls the widest application coverage in the aftermarket.
A soft or spongy pedal, fluid seeping at the hose, or a cracked, bulging or chafed outer cover are signs the hose may need replacing. If a worn front hose is the cause, this part replaces it. Have the brake system diagnosed first, because other components can produce the same symptoms. After installation, bleed the brakes and follow the vehicle service information for torque values and any sealing washers required.
Interchange: B916610 · HB86055 · 77852 · 513208 · 513254 · 18032822 · 18J1111 · 8744055 · H380280 · SP8649 · E15571060 · BH2302 · 380280 · 17989770 · 22111827 · 22113473 · 8221134730 · 45380280 · BH380280 · 221074 · BH132325 · F124596 · F132325
This part cross-references / interchanges with the following part numbers:
What does a front brake hydraulic hose do?
It is the flexible link that carries brake fluid from the vehicle's rigid brake line to the front brake. It flexes as the suspension travels and the wheels steer.
Will the Centric 150.66055 fit my 1991-1999 Chevrolet S10?
Yes. It is listed as a front brake hose for the 1991-1999 Chevrolet S10, 1991-1999 GMC Sonoma and 1995-1997 Chevrolet Blazer. Check the "Vehicles it fits" section to confirm your vehicle.
Which brake position does this hose install in?
Centric catalogs part number 150.66055 for the front brake position on the listed applications.
What are signs a brake hose may need replacing?
Common signs include a soft or spongy pedal, fluid seeping at the hose, or a cracked, swollen or chafed outer cover. Have the brakes diagnosed, since other parts can cause these symptoms.
Do I need to bleed the brakes after installing it?
Yes. Replacing a hydraulic hose opens the system, so bleed the brakes to remove air. Follow the vehicle service information for torque values and any sealing washers required.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.