Centric Parts Brake Hydraulic Hose P/N:150.66074
Route pressurized brake fluid to the front right wheel with the Centric Parts brake hydraulic hose, part number 150.66069. It is the flexible link between the vehicle's rigid brake line and the wheel-end brake hardware, and it moves with the suspension and steering. It fits many vehicles, among them the 1996-2002 Chevrolet Express 2500, the 1996-2002 GMC Savana 2500 and the 1996-2001 Chevrolet Express 3500. See the "Vehicles it fits" section for the full list and engine details.
A brake hose may need replacing if it shows cracking, swelling or bulging, or fluid seepage at the fittings, or if the brake pedal feels soft or spongy. These signs can have other causes, so inspect the brake system before you replace parts. It is also a good time to check the front left hose. Follow the vehicle service information for the correct fittings, hardware and torque, and bleed the brakes after installation.
Interchange: B916871 · HB86069 · 78772 · 18039388 · 18J1421 · H380587 · E15571074 · 380587 · 22163386 · 22163514 · BH380587 · 221251 · BH140497 · F140497
This part cross-references / interchanges with the following part numbers:
What does a brake hydraulic hose do?
It is the flexible section of the brake line. It carries brake fluid under pressure from the rigid line to the wheel-end brake hardware and flexes with suspension and steering movement.
Which position does Centric 150.66069 install in?
The catalog lists Centric 150.66069 for the front right position on its listed applications.
Does this hose fit the 1996-2002 Chevrolet Express 2500?
Yes. The 1996-2002 Chevrolet Express 2500 is a listed application, as are the 1996-2002 GMC Savana 2500 and the 1996-2001 Chevrolet Express 3500. See the "Vehicles it fits" section for the rest.
What are signs a brake hose may need replacing?
Cracks, swelling or bulging, fluid seepage at the ends, or a soft brake pedal may be signs of a worn hose. These symptoms can have other causes, so inspect the brake system first.
Do I need to bleed the brakes after installing it?
Yes. Opening the hydraulic system lets air in, so bleed the brakes after installation. Follow the vehicle service information, which also gives the correct hardware and torque.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.