Centric Parts Brake Hydraulic Hose P/N:150.67008
Route brake fluid from the hard line to the caliper or wheel cylinder with the Centric Parts Brake Hydraulic Hose 150.67008, a flexible high-pressure line that carries hydraulic pressure while allowing the suspension and steering to move. It's a direct-fit replacement for a long list of classic Dodge trucks and vans — including the 1948-1949 Dodge B-1 Truck, 1957-1958 Dodge D100 Pickup, 1961-1967 Dodge D200 Series, and 1961-1974 Dodge P300 Van (engine: All) — see the Buyer's Guide tab for the full list of applications.
- EPDM rubber outer sleeve: black protective covering over the hydraulic hose; it is not Teflon lined.
- DOT approved: meets Department of Transportation requirements for brake hose.
- Metal end fittings, inverted flare both ends: End 1 and End 2 use inverted flares with a 5/8-18 external thread on the female end.
- 18.740 in (476 mm) overall length. Country of origin: China.
Signs a brake hose may need replacing include cracking, bulging, fluid seepage at the fittings, or a soft, spongy pedal. Quantity varies by application — many of the listed vehicles use two, while some use one; this listing is for one hose, so order the quantity your vehicle requires.
Interchange: B917792 · HB87008 · 88420 · BH188420 · 2066 · 17617 · 18031716 · 18J5 · 8740008 · H6222 · SP968 · E15572013 · 6222 · 1261958 · BH6222 · 223515 · F6222
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
What does this brake hydraulic hose do?
It carries pressurized brake fluid from the vehicle's hard line to the caliper or wheel cylinder, flexing to allow suspension and steering movement while maintaining hydraulic pressure.
Which vehicles does part 150.67008 fit?
It's a direct-fit replacement for many classic Dodge trucks and vans from 1948-1974, such as the B-1 Truck, D100 Pickup, D200 Series and P300 Van. Check the Buyer's Guide tab for the full list.
How many hoses do I need?
Quantity varies by application — many listed vehicles use two while some use one. This listing is for a single hose, so order the quantity your specific vehicle requires.
Is this brake hose DOT approved?
Yes. The catalog lists it as DOT approved, meaning it meets Department of Transportation requirements for brake hose.
What are the hose's specifications?
It has an EPDM rubber outer sleeve, metal end fittings with inverted flares on both ends, a 5/8-18 external thread on the female end, and an overall length of 18.740 in (476 mm).
Write a Review